30204 Bearing 20x47x15.25mm
30204
Bore Diameter:20 mm
Outside Diameter:47 mm
Width:15.25 mm
Weight:0.126 kg
The 30204 bearing is a taper roller bearing with an inner diameter of 20 mm , an outer diameter of 47 mm, a width of 15.25 mm. It typically uses P0,P5,P6,P4 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Series: taper roller bearing
Brand: CNJX
Bearing type: 30204 bearing
Inner: 20mm
Outside diameter: 47mm
Thickness: 15.25mm
Product Description
About the tapered roller bearings
Tapered roller bearings can be separated by the inner ring and roller, maintains a together make up components and outer ring can be installed separately. Roller and roll the contact point of the fixed way contact wires can reduce stress concentration.
Tapered roller bearings can withstand the big radial direction load and the axial load. Due to the circular cone roller bearings can only transfer one-way axial load, therefore, to transfer the opposite direction of the axial load will need another with the installation of symmetric circular cone roller bearings. Tapered roller bearings is the largest amount of single row circular cone roller bearings. In the front of the car wheel, recent years have used the small size of the double row circular cone roller bearings. Four row circular cone roller bearings used in large cold, ReGaJi and other heavy machine.
Features of Tapered Roller Bearings:
Single-row tapered roller bearings have an outer ring, and an inner ring assembly consisting of an inner ring and a group of tapered rollers embraced by the basket-shaped cage. The outer ring(cup) is separable from the inner ring assembly. According to standardized dimensions of tapered roller bearing specified by ISO, the outer ring or inner ring assembly of any tapered roller bearing with standardized dimension could make international exchange with the outer ring or inner ring assembly of the same series. That is to say, besides external dimensions, tolerances shall be in accordance with the provisions of the ISO492 (GB307), the cone angle of the inner ring assembly and cone diameter of assembly must also comply with the relevant provisions of the exchange.
Generally, when cone angle of outer ring raceway of single-row tapered roller bearings is from 10°to 19°, they could withstand axial loads and radial loads spontaneously. The big the cone angle, the larger the axial loads carrying capacity. Large-sized tapered roller bearings with post code plus B, the cone angle is from 25° to 29°, they carry large axial loads. In addition, single-row tapered roller bearings have the ability to adjust clearance during installation. The inner ring (or outer ring) of double row tapered roller bearings is a whole part. The small end face between two inner rings (or outer rings) is similar, there is one middle spacer ring between two inner rings, and the clearance is adjusted by thickness of spacer ring, which can also be used for adjusting the pre-interference of double row tapered roller bearings.
Share this product to:
Let more people see your product
-
- 30222 bearing 110x200x41.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30222 bearing Inner: 110mm Outside diameter: 200mm Thickness: 41.5mm
-
- 30208 bearing 40x80x19.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30208 bearing Inner: 40mm Outside diameter: 80mm Thickness: 19.75mm
-
- 30315 bearing 75x160x40mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30315 bearing Inner: 75mm Outside diameter: 160mm Thickness: 40mm
-
- 32212 bearing 60x110x29.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32212 bearing Inner: 60mm Outside diameter: 110mm Thickness:
-
- 694-2Z bearing 4x11x4mm
- Bearing Type:Deep groove ball bearing Inner Diameter:4mm Outer diameter:11mm Width:4mm Weight :0.0018kg
-
- 6408 bearing 40x110x27mm
- Bearing Type:Deep groove ball bearing Inner Diameter:40mm Outer diameter:110mm Width:27mm Weight :1.221kg
-
- 6404-2RS bearing 20x72x19mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:72mm Width:19mm Weight :0.41kg
-
- 6806-2RS bearing 30x42x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:30mm Outer diameter:42mm Width:7mm Weight :0.026kg