24138B.536423 Bore 190 Mm, Spherical Roller Bearings For Bar Mills For Loose Fit On The Roll Neck
The 24138B.536423 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 24138B.536423 bearing is a Spherical Roller Bearings for Bar Mills for loose fit on the roll neck with an inner diameter of 190 mm , an outer diameter of 320 mm, a width of 128 mm. inner rings made of case hardening steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, Its dynamic radial rated load is approximately 1400000 N, its static radial rated load is approximately 2500000 N. It uses C2 standard radial clearance, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
24138B.536423 bearings ( 190 mm x 320 mm x 128 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 24138B.536423 |
| Interchangeable | FAG 24138B.536423 |
| Desgin Figure | 1 |
| Cage | Stamping steel cage |
| Radial internal clearance | C2 |
| Seal | Open |
| Bearing Type | Spherical Roller Bearings for Bar Mills for loose fit on the roll neck |
| Bearing Weight [lb] | 92.814 |
| d φ Inside [inch] | 7.480 |
| D Φ Outside [inch] | 12.598 |
| B Width [inch] | 5.039 |
| rs min Chamfer | 3 mm |
| Cr Radial Dynamic [lbf] | 314720 |
| C0r Radial Static [lbf] | 562000 |
| Factor | |
| e | 0.41 |
| Y1 | 1.66 |
| Y2 | 2.47 |
| Y0 | 1.62 |
Share this product to:
Let more people see your product
