534370A Bore 240 Mm, Split Cylindrical Roller Bearings For Crankshafts In Cold Pilger Rolling Mills, Machined Brass Cage
The 534370A Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 534370A bearing is a Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills with an inner diameter of 240 mm , an outer diameter of 440 mm, a width of 152 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial, Its dynamic radial rated load is approximately 1250000 N, its static radial rated load is approximately 1760000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
534370A bearings ( 240 mm x 440 mm x 152 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 534370A |
| Interchangeable | FAG 534370A |
| Desgin Figure | 2 |
| Cage | Machined Brass Cage |
| Seal | Open |
| Bearing Type | Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills |
| Bearing Weight [lb] | 286.598 |
| d φ Inside [inch] | 9.449 |
| D Φ Outside [inch] | 17.323 |
| B Width [inch] | 5.984 |
| Bi Width [inch] | 6.142 |
| DD [inch] | 20.079 |
| b [inch] | 3.563 |
| rs min Chamfer | 8x45° mm |
| Cr Radial Dynamic [lbf] | 281000 |
| C0r Radial Static [lbf] | 395648 |
Share this product to:
Let more people see your product
