2202 Bearing
The 2202 bearing is a self-aligning ball bearing with an inner diameter of 15 mm , an outer diameter of 35 mm, a width of 14 mm. It typically uses P4 grade precision tolerances and Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Self-aligning Ball Bearing
Model:2202
Size:15mm*35mm*14mm
Material:chrome steel
Self-aligning Ball Bearing 2202 is recommended when alignment of the shaft and housing is difficult and the shaft may flex.
The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center.
Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
We can supply bearings as follows:
Share this product to:
Let more people see your product
-
- Self-aligning Ball Bearings 1316K
- Brand: FAG Category: Self-aligning Ball Bearings Model: 1316K Size (I*O*T) 80mm*170mm*39mm
-
- 1200 Self-aligning Ball Bearings
- Specifications: Self-aligning ball bearing 1200 1. High Precision,Low noise 2. The Best price 3. Stock
-
- 1320 Self-aligning Ball Bearings
- We can provide you with the best quality and the price of
-
- 11204TV Self-aligning Ball Bearings
- Self-aligning ball bearings are double row self-retaining units comprising solid outer rings