ZKLDF120 120*210*40mm ZKLDF Series Rotary Table Bearings
The ZKLDF120 bearing is a YRT Bearing with an inner diameter of 120 mm , an outer diameter of 210 mm, a width of 40 mm. It typically uses P4 grade precision tolerances and Gcr15 balls, Gcr15 rings. It primarily bears Radial, Its dynamic radial rated load is approximately 7.1, its static radial rated load is approximately 5.83. It uses C0 standard radial clearance, Rubber. together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Feature: deep groove ball bearing
Application: Rotary table
ZKLDF120 120*210*40mm ZKLDF Series Rotary Table Bearings
ZKLDF120
| d | 120 mm | Sizes d > 460 mm available by agreement |
| D | 210 mm | |
| H | 40 mm | |
| 22 | Number of fixing holes in inner ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. | |
| 2 | Number of retaining screws | |
| 21 | Number of fixing holes in outer ring Attention! For fixing holes in the adjacent construction. Note the pitch of the bearing holes. | |
| 3 | Number of extraction threads | |
| a | 6,2 mm | Fixing holes in inner ring |
| D1 | 185 mm | |
| D2 | 159 mm | |
| D3 | 181 mm | |
| d1 | 7 mm | Fixing holes in inner ring |
| d2 | 11 mm | Fixing holes in inner ring |
| d3 | 7 mm | Fixing holes in outer ring |
| G | M8 | Extraction thread |
| H1 | 26 mm | |
| J | 135 mm | Fixing holes in inner ring |
| J1 | 195 mm | Fixing holes in outer ring |
| t | 24 x 15° | Pitch t Including retaining screws and extraction threads Quantity X t |
| m | 4,8 kg | ≈ Mass |
| MA | 14 Nm | Screw tightening torque Tightening torque for screws to DIN 912, grade 10.9. |
| Ca | 76000 N | Basic dynamic load rating, axial |
| C0a | 315000 N | Basic static load rating, axial |
| Cua | 11100 N | Fatigue limit load, axial |
| nG | 4300 1/min | Limiting speed The limiting speeds increased by a factor of two are valid for bearings of the current generation with the internal suffix -B. |
| caL | 1500 N/µm | Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| crL | 400 N/µm | Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| ckL | 5500 Nm/mrad | Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| caL | 2500 N/µm | Axial rigidity of rolling element set |
| crL | 400 N/µm | Radial rigidity of rolling element set |
| ckL | 8000 Nm/mrad | Tilting rigidity of rolling element set |
Compared with general bearings, ZKLDF has its own characteristics of low friction, high rotation accuracy, high speed limit, etc. It can also withstand high axial and radial loads and has high tilt stiffness. Thanks to so many advantages and features, ZKLDF is also suitable for the field of load load and high precision. Medical equipment, high-precision turntables, and high-precision test equipment all require the use of ZKLDF.
Compared with ordinary bearings, ZKLDF series bearings must be cautious in use and operation due to the high precision of the bearings, otherwise it will directly affect its operating life. ZKLDF series bearings are filled with grease, so they can be used directly during installation. In the initial stage of use, the frictional torque of the bearing will be relatively large because of the resistance of the grease. After running for a while, the excess grease will overflow and the torque will return to normal.
The accuracy of the ZKLDF bearing also requires the precision of the shaft and the housing, and the requirements for them are also very high. In order to achieve the desired accuracy, the clearance should be as close as possible to zero in order to achieve its maximum operating efficiency.
ZKLDF also pays attention to the surrounding working environment when handling and installing. The mounting force can only be used in the bearing rings that need to be installed. It does not need to be applied to other parts of the bearing. The bearings are also stored in a clean, ventilated, non-corrosive environment.
Share this product to:
Let more people see your product
-
- YRTC1030 1,030*1,300*145mm YRTC Axial/radial angular contact ball bearings
- Features Axial radial bearings YRT, YRTC and YRTS and axial angular contactball
-
- YRTC650 650*870*122mm yrt rotary table bearings
- Axial/radial bearings are double direction axial bearings for screw mounting, with a
-
- YRTM325 325×450×60mm YRTM Axial/radial bearing With measurement system
- Axial radial bearings YRT are axial and radial combined cylindrical roller bearings,
-
- YRTC180 180*280*43mm YRTC Axial/radial angular contact ball bearings
- Features Axial radial bearings YRT, YRTC and YRTS and axial angular contactball
-
- YRT100 100*185*38mm Rotary Table Bearing
- YRT rotary table bearings belong to an ultra-precision grade bearing, so
-
- ZKLF2068-2RS-PE 20*68*28mm High precision spindle bearing
- Screw drive bearing arrangements are subjected to requirements that often cannot be
-
- 128807K 36*60*91mm Bearing assembly for downhole motor
- Our main bearings products including bearings of petroleum screw drilling tools, equal-wall-thickness
-
- F-563087-2RS/P4 50*90*23mm Fanuc servo motor Ceramic Ball bearing
- Servo motor bearing features: good sealing, high stability, metal material is preferred.