YRTC1030 1,030*1,300*145mm YRTC Axial/radial Angular Contact Ball Bearings
YRTC1030
Bore Diameter:1030 mm
Outside Diameter:1300 mm
Width:145 mm
Weight:4 kg
Reference FOB Price:US1 ~ 100 / Piece
Min. Order:1 Piece
The YRTC1030 bearing is a YRT Bearing with an inner diameter of 1030 mm , an outer diameter of 1300 mm, a width of 145 mm. It typically uses P4 grade precision tolerances and Gcr15 balls, Gcr15 rings. It primarily bears Radial, Its dynamic radial rated load is approximately 160, its static radial rated load is approximately 360. It uses C0 standard radial clearance, Rubber. together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Application: Rotary turn table
×
Detailed description
YRTC1030
1,030*1,300*145mm YRTC Axial/radial angular contact ball bearings
| Designation | Dimensions (mm) | Fixing holes | Threaded extraction hole | Screw tightening torque MA Nm |
||||||||||||||
| d | D | H | H1 | H2 | C | D1 max. |
J | J1 | Inner ring | Outer ring | G | Qty | ||||||
| d1 | d2 | a | Qty | d3 | Qty | |||||||||||||
| YRTC1030 | 1,030 | 1,300 | 145 | 92.5 | – | 40 | 1,215 | 1,075 | 1,255 | 18 | 26 | 17 | 70 | 18 | 66 | M16 | 6 | 284 |
| Pitch t | Basic load ratings | Limiting speed nG |
Rigidity | Mass m =kg |
||||||||||
| Quantity X t | axial | radial | bearing position | rolling element set | ||||||||||
| Including retaining screws and extraction threads | dyn. Ca N |
stat.C0a N |
dyn. Cr N |
stat. C0r N |
Continuous operation min–1 |
Swivel type operation, short operating duration min–1 |
axial CaL kN/µm |
radial CrLkN/µm | Tilting rigidity CkLkNm/mrad |
axial CaL kN/µm |
radial CrL kN/µm |
Tilting rigidity CkLkNm/mrad |
||
| YRTC1030 | 72 x 5° | 1,000,000 | 10,300,000 | 510,000 | 2,050,000 | 40 | 100 | 36.4 | 11.2 | 5,400 | 74.9 | 14.2 | 11,165 | 375 |
Axial angular contact ball bearings
Features Axial radial bearings YRT, YRTC and YRTS and axial angular contact
ball bearings ZKLDF are ready-to-fit high precision bearings for
high precision applications with combined loads. They can support
radial loads, axial loads from both sides and tilting moments without
clearance and are particularly suitable for bearing arrangements
with high requirements for running accuracy.
Due to the fixing holes in the bearing rings, the units are very easy
to fit.
The bearings are radially and axially preloaded after fitting.
The mounting dimensions of all series are identical.
Axial/radial bearings YRT in the size range of d = 580 mm to
d = 1 030 mm have been replaced by YRTC.
Compared with the predecessor product YRT, these bearings have
higher rigidity, a higher limiting speed and lower bearing friction.
With angular measuring
system
Axial/radial bearings are also available with an absolute value
angular measuring system or have systems with pitch-coded
reference marks. The measuring systems can measure angles to
an accuracy of a few angular seconds by non-contact means,
see page 44 and page 78.
Areas of application For standard applications with low speeds and small operating
durations, such as indexing tables and swivel type milling heads,
the most suitable bearings are generally series YRT and YRTC,
Figure 1.
For the bearing arrangements of direct drive axes, there is the
series YRTS. Due to their high limiting speeds and very low, uniform
frictional torque across the whole speed range, these bearings are
particularly suitable for combtion with torque motors, Figure 1.
For higher accuracy requirements, these bearings are also available
with restricted axial and radial runout accuracy.
Axial angular contact ball bearings ZKLDF are particularly suitable
for high speed applications with long operating duration, Figure 1.
They are characterised by high tilting rigidity, low friction and low
lubricant consumption.
Axial/radial bearings Axial/radial bearings YRT, YRTC and YRTS have an axial and
a radial component.
The axial component comprises an axial needle roller or cylindrical
roller and cage assembly, an outer ring, L-section ring and shaft
locating washer and is axially preloaded after fitting. The radial
component is a full complement cylindrical roller set in YRT and
a cage-guided, preloaded cylindrical roller set in YRTC and YRTS.
The outer ring, L-section ring and shaft locating washer have fixing
holes.
The unit is located by means of retaining screws for transport and
safe handling.
Sealing Axial/radial bearings are supplied without seals.
Lubrication The initial greasing of YRTS corresponds to the grease Arcanol
LOAD150 and, in the case of YRT and YRTC, to the grease Arcanol
MULTITOP. The bearings can be lubricated via the outer ring and
L-section ring.
Axial angular contact
ball bearings
Axial angular contact ball bearings ZKLDF comprise a single-piece
outer ring, a two-piece inner ring and two ball and cage assemblies
with a contact angle of 60°. The outer ring and inner ring have
fixing holes for screw mounting of the bearing on the adjacent
construction.
The unit is located by means of retaining screws for transport and
safe handling.
Sealing Axial angular contact ball bearings have sealing shields on both
sides.
Lubrication The initial greasing of current axial angular contact ball
bearings ZKLDF (Generation B) corresponds to the grease Arcanol
MULTITOP. The bearings can be relubricated via the outer ring.
Share this product to:
Let more people see your product
-
- YRTS260 260*385*55mm YRTS high speed rotary table bearing
- YRTS high-speed rotary table bearings are high-precision bearings. They are widely used
-
- YRT180 180*28*43mm Rotary Table Bearing
- YRT precision rotary table bearing is a kind of bearing fixed
-
- YRT260 260*385*55mm Rotary Table Bearing
- YRT precision rotary table bearing is a kind of bearing fixed
-
- YRTC120 120*210*40mm yrt rotary table bearings
- Axial/radial bearings are double direction axial bearings for screw mounting, with a
-
- F-213625.T6AR Multi-Stage cylindrical roller thrust bearings
- Tandem Thrust bearings are comprised of "stages" which include precision ground and
-
- TAB-080160-201 203.2*406.4*190.5mm Multi-Stage cylindrical roller thrust bearings
- TandemThrust Bearings can receive heavy load in a limited space and support
-
- RE12025UUCC0P5 120*180*25mm Crossed roller bearing for harmonic drive
- With the Cross-Roller Ring, cylindrical rollers are arranged with each
-
- 6305-H-T35D 25*62*17mm LNG pump bearing low temperature bearing
- LNG (Liquefied Natural Gas) pumps are used for receiving and discharging