YRT460 460X600X70mm Rotary Table Bearing
The YRT460 bearing is a YRT Bearing with an inner diameter of 460 mm , an outer diameter of 600 mm, a width of 70 mm. It typically uses P4 grade precision tolerances and Gcr15 balls, Gcr15 rings. It primarily bears Radial, Its dynamic radial rated load is approximately 95, its static radial rated load is approximately 150. It uses C0 standard radial clearance, Rubber. together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Application: Rotary table
YRT460 460X600X70mm Rotary Table Bearing
| bearing type | Dimensions | fixing holes | Number of retaining screws | ||||||||||||
| d | D | H | H1 | C | D1 | J | J1 | inner ring | outer ring | ||||||
| unit: mm | d1 | d2 | a | qty | d3 | qty | |||||||||
| mm | mm | ||||||||||||||
| YRT460 | 460 | 600 | 70 | 46 | 22 | 560 | 482 | 580 | 9.3 | 15 | 8.2 | 46 | 9.3 | 45 | 2 |
| bearing type | Extraction thread hole | Number of pitches X angle of pitches | Screw tightening torque | Basic load rating | Limiting speed | Bearing frictional torque | weight | ||||
| axial | radial | ||||||||||
| dynamic load | static load | dynamic load | static load | ||||||||
| MA2) | Ca | Coa | Cr | Cor | grease | ||||||
| G | qty | qty×t |
Nm | KN | r/min | Nm | Kg | ||||
| YRT460 | M12 | 3 | 48×7.5° | 34 | 355 | 2800 | 200 | 765 | 120 | 70 | 45 |
YRT precision rotary table bearing is a kind of bearing fixed by a bidirectional thrust bearing and a
centripetalguided bearing. They can support radial loads, axial loads from both directions and
tilting moments free from clearance and are particularly suitable for bearing arrangements with
high requirements for running accuracylike rotary tables, millings heads and reversible clamps.Due
to the fixing holes in the bearing rings, the units are very easy to fit. The bearings are radially and
axially preloaded after fitting.
Bearing features:
1. High precision: precision at P4, P2.
2. High rigidity: YRT series bearings are with preload.
3. High load capacity: bearings can support axial load, radial load and tilting load.
4. High speed: YRTS series bearings can be applied in the high speed working condition
Sealing/Lubricant:
YRT bearings are supplied with seals. YRT bearings are greased by a lithium complex soap grease
and can be lubricated via the outer ring and L-section ring.
Operating temperature:
YRT bearings are suitable for operating temperatures from 30℃ to 120℃.
Share this product to:
Let more people see your product
-
- 3E907KAT2 37*50*8mm Robots Flexible Bearings Harmonic Drive Strain Wave Gear
- Flexible bearings for harmonic reducer are mainly used in harmonic reducer. Harmonic
-
- 128718K 90*170*380mm Mud motor bearings: multi-row bearings made from special steel
- Our main bearings products including bearings of petroleum screw drilling tools, equal-wall-thickness
-
- YRT50 50*126*30mm Rotary Table Bearing
- YRT rotary table bearings belong to an ultra-precision grade bearing, so
-
- YRT80 80*146*35mm Rotary Table Bearing
- YRT rotary table bearings belong to an ultra-precision grade bearing, so
-
- Mud Stack Thrust Angular Contact Mud Motor Bearings , Dual Ball Bearing 128916M
- The bearings in a mud motor at the end of a drill
-
- 128718M TC bearing Tungsten Carbide Radial Bearings
- Whether you’re drilling for oil or gas, the bearings in a mud
-
- 128713K Full Complement Monton Mud Motor Bearings For Drill Motor With Codes
- Special steel for all bearing components • Full complement bearing • Precision matched
-
- mud motor bearings ,mud lubricated thrust bearings 128723M
- Whether you’re drilling for oil or gas, the bearings in a mud