XV70 Crossed Roller Bearing 70X120X17mm
The XV70 bearing is a Cross roller bearing with an inner diameter of 70 mm , an outer diameter of 120 mm, a width of 17 mm. It typically uses P4 grade precision tolerances and ZZ type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
XV70 Crossed roller bearing 70X120X17mm
Technical:
XV70 Crossed roller bearing
di 70 mm
Da 120 mm
hi 17 mm
Ca 23.6 KN Basic dynamic load rating, axial
C0a 70 KN Basic static load rating, axial
Cr 15.1 KN Basic dynamic load rating, radial
C0r 28 KN Basic static load rating, radial
Mass 0.84 kg
Description:
XV70 Crossed roller bearing
- Structure:Crossed Roller Bearing
- Gear teeth: without
- Seals type:double seals
- Material: 52100/100Cr6/GCr15
- Product description: XV70 Crossed Roller Bearings( structure,without gear teeth) belongs to XV series crossed roller slewing bearing, outer dia.75mm~180mm. often used as robot bearing
P
Our Services
1.Your inquiry to our product & price will be replied within 24 hours.
2.OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
3.Your business relationship with us will be confidential to any third party.
Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.
2. Withstands force in any direction. Alternately crossed rollers 45º angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80℃ . If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence,Do not tighten bolts randomly.
Cautions:
1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range,please contact LDB.
2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.
3.Please do not remove or apply force to the bolt and nut of the split bearing
Share this product to:
Let more people see your product
-
- High precision XIU10/288 Cross roller bearing 216*340*38mm
- we have the stock in XIU10/288 Cross roller Bearing.If you have the
-
- High precision XIU15/400 Cross roller bearing 304*475*55mm
- we have the stock in XIU15/400 Cross roller Bearing.If you have the
-
- Super precision XIU15/414 Cross roller bearing 325*484*56mm
- we have the stock in XIU15/414 Cross roller Bearing.If you have the
-
- Cheaper price XIU10/420 Cross roller bearing 332*486*38mm
- we have the stock in XIU10/420 Cross roller Bearing.If you have the
-
- 6004ZZ Deep Groove Ball bearing 20x42x12mm
- we have the stock in 6004ZZ Deep Groove Ball Bearing.If you have
-
- 61848 2RSC3 Thin wall Deep groove ball bearing
- we have the stock in 61848 2RSC3 Deep Groove Ball Bearing.If
-
- 6005ZZ Deep Groove Ball bearing 25x47x12mm
- we have the stock in 6005ZZ Deep Groove Ball Bearing.If you have
-
- 29414 bearing 75x150x48MM
- we have the stock in 29414 Bearing.If you have the request for