XR637050 Crossed Roller Bearing
The XR637050 bearing is a Cross roller bearing with an inner diameter of 300 mm , an outer diameter of 400 mm, a width of 37 mm. It typically uses P4 grade precision tolerances and Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
XR637050 Crossed Roller Bearing 300X400X37mm
Technical:
| Type | d(mm) | D(mm) | B(mm) | r |
| XR496051 | 203.2 | 279 | 31.75 | 1.5 |
| XR496052 | 203.2 | 279 | 31.75 | 1.5 |
| JXR637050 | 300 | 400 | 36.492 | 1.5 |
| XR637050 | 300 | 400 | 37 | 1.5 |
| JXR678054 | 300 | 480 | 60 | 1.5 |
| JXR652050 | 310 | 425 | 45 | 2.5 |
| XR678052 | 330 | 457 | 63.5 | 3.3 |
| JXR699050 | 370 | 495 | 50 | 3.3 |
| XR736052 | 432.03 | 571.5 | 38.1 | 3.3 |
| XR766051 | 457.2 | 609.6 | 63.5 | 3.3 |
1.Your inquiry to our product & price will be replied within 24 hours.
2.OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
3.Your business relationship with us will be confidential to any third party.
Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.
2. Withstands force in any direction. Alternately crossed rollers 45º angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80℃ . If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence,Do not tighten bolts randomly.
Cautions:
1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range,please contact LDB.
2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.
3.Please do not remove or apply force to the bolt and nut of the split bearing
Share this product to:
Let more people see your product
-
- RFQ XI 503500N Cross roller bearing 3200*3690*138mm
- we have the stock in XI 503500N Cross roller Bearing.If you have
-
- CRBS708 Crossed Roller Bearing 70X86X8mm
- we have the CRBS708 Crossed roller bearing in stocks.If you have the
-
- Good service XI 301304N Cross roller bearing 1140*1416*80mm
- we have the stock in XI 301304N Cross roller Bearing.If you
-
- Low price XIU25/710 Cross roller bearing 570*812*75mm
- we have the stock in XIU25/710 Cross roller Bearing.If you have the
-
- B71904C.T.P4S.UL Spindle Bearings
- we have the B71904C.T.P4S.UL Spindle Bearings in stock.If you have the request
-
- SY 25 TF Pillow block bearing
- There are large available stocks in SY 25 TF Pillow block bearing.If
-
- 30308 tapered roller bearing 40*90*25.25mm
- we have the 30308 tapered roller bearing in stock.If you have the
-
- SY 1/2 TF Pillow block bearing
- There are large available stocks in SY 1/2 TF Pillow block bearing.If