Washer MB09

🔍

MB09

Bore Diameter:45 mm

Outside Diameter:69 mm

Width:42.5 mm

The MB09 bearing is a Gasket or Washer with an inner diameter of 45 mm , an outer diameter of 69 mm, a width of 42.5 mm. no type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Dimensions:

Inside Diameter:

45 mm

Outside Diameter:

69 mm

Thickness:

42.5 mm

Specifications:

Structure:

Gasket or Washer

Brand:

JHB

Bearing Material:

Low Carbon Steel

Seals Type:

Transaction Information:

Detailed description

Locking washerLocking washers are simple, stable and reliable fastening elements. The washer engages a keyway in the shaft and locks the nut in position if one of the tabs is bent over into one of the slots around the circumference of the nut. Locking washers are used with lock nuts in the KM and KML series as well as for the lock nuts with inch dimensions in the N and AN series.Installing the washer:the pre-assembled washers are installed in pairs,cam face to cam face.

Tightening: tighten lock with standard tools according to the guidelines.Tightening guildelines for other bolt grades are available through your lock representative.

Share this product to:

Let more people see your product

How can you buy Washer MB09 on the Internet?
High quality MB09 ( ID: 45 mm OD: 69 mm WD: 42.5 mm , Low Carbon Steel Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. MB09. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- Gasket or washer MB36
- Type MB00 MB01 MB02 MB03 MB04 MB05 MB06 MB07 MB08 MB09 MB10 MB11 MB12 MB13 MB14 MB15 MB16 MB17 MB18 MB19 MB20 MB21 MB22 MB23 MB24 MB25 MB26 MB27 MB28 MB29 MB30 MB31 MB32 MB33 MB34 MB36 MB38 MB40
- Gasket or Washer MB40
- Type MB00 MB01 MB02 MB03 MB04 MB05 MB06 MB07 MB08 MB09 MB10 MB11 MB12 MB13 MB14 MB15 MB16 MB17
- Gasket or Washer MB38
- Type Boundary dimension(mm) Weight(kg) d3 d5 M f1 B1 MB00 10 21 8.5 3 1.0 9 MB01 12 25 10.5 3 1.0 11 MB02 15 28 13.5 4 1.0 11 MB03 17 32 15.5 4 1.0 11
- Gasket or washer MB36
- Type Boundary dimension(mm) Weight(kg) d3 d5 M f1 B1 MB00 10 21 8.5 3 1.0 9 MB01 12 25 10.5 3 1.0 11 MB02 15 28 13.5 4 1.0 11 MB03 17 32 15.5 4 1.0 11 MB04 20 36 18.5 4 1.0 11
- Turntable ball bearings 011.20.250 with teeth 352x170x60mm
- The standard bearing type 011.20.250 belongs to four point contact ball bearing
- Turntable ball bearings 010.35.559 full size 432x695x91mm
- Four point contact ball slewing bearings 010.35.559 without gear teeth with
- High precision slewing ball bearing gear teeth 470NS1 640x470x50mm
- slewing bearing 470NS1 structure belongs to four point contact ball turntable bearing
- Turntable ball bearing SD.486.20.00.B no teeth 342x486x56mm
- Bearing factory code: SD.486.20.00.B Structure:four point contact ball slewing bearing Bearing full

Washer MB09

MB09 Related Products »

Product Groups

Information

Category