Twin Screw Extruder Gearbox Shaft Bearing F-52978.T4AR

 Twin screw extruder gearbox shaft bearing F-52978.T4AR

Twin screw extruder gearbox shaft bearing F-52978.T4AR With high efficiency, high performance, low noise, long life, customizable characteristics

Bearing factory  Number F-52978.T4AR

Bearing Item  code F52978T4AR  f-52978.t4ar

Inner diameter d Standard size,offer drawing to confirm

Outer diameter D  Standard size,offer drawing to confirm

Total height B          Standard size,offer drawing to confirm

weight(kg) Standard 

Cage type Steel or Brass Standard Cage

Precision grade Standard precision 

Bearing Material GCr15 bearing steel

Description Tandem cylindrical roller thrust bearing

UPC/HS code 8482500090

T4AR

The Axial Forces Are Supported By A four -Stage Tandem Bearing T4AR Combined With An Axial Cylindrical Roller Bearing  

application Tandem bearings have proven effective principally in gearboxes for single and twin screw extruders in the rubber and plastics industry.

Other possible applications include:

 deep hole drilling equipment

 friction welding machines.

F-52978.T4ARTandem bearing load:

The common loads during the operation of extruders form the design basis of T.AR series series thrust bearings. The maximum axial load Fa max series thrust bearing has been specified in the quotation drawing. The bearing is not allowed to exceed the load during operation.

TandemF-52978.T4AR bearing deformation:

For twin-screw extruders, the engagement between the screws must be ensured throughout the working rangeProcess gap. The deformation of the T.AR series series thrust bearing must be observed together with the second thrust bearing and matched with it. This is especially important when bearings of different designs are used on the two output shafts.

Tandem F-52978.T4AR bearing radial guide:

The output shaft consists of centripetal bearings (such as needle roller bearings or SL series single row full cylindrical roller shaftsCarry out radial guidance.

Tandem F-52978.T4AR bearing lubrication:

To ensure adequate heat dissipation and lubrication, the T.AR series series thrust bearings are lubricated with circulating oil. Lubrication systems are usually equipped with a lubricating oil filter and cooling unit.