Thrust Ball Bearing 51120
The 51120 bearing is a Thrust Ball Bearing with an inner diameter of 100 mm , an outer diameter of 130 mm, a width of 25 mm. It typically uses P5,P2 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Thrust ball bearings can be devided into single direction and double . Single direction thrust ball bearings, as their name suggests, can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load. Double direction thrust ball bearings can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions. They must not be subjected to radial load.
Features:
1. Available in two designs: single direction thrust ball bearings and double direction thrust ball bearings
2. To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.
3. High quality steel-ultra clean steel to extend bearing life by up to 80%.
4. Advanced Grease Technology - NSK lubricants that can extend grease life and performance.
5. High Grade Balls - Quiet and smooth operation even at high speed.
6. Optional seating rings take initial misalignment.
Thrust Ball Bearing 51120
ID:100MM
OD:130MM
TH:25MM
Cr (kN):85.0
Cor(kN):268
N.W.:0.990kgs
Share this product to:
Let more people see your product
-
- Thrust Ball Bearing 51120
- Thrust Ball Bearing 51120 ID:100MM OD:130MM TH:25MM Cr (kN):85.0 Cor(kN):268 N.W.:0.990kgs
-
- Thrust Ball Bearing 51118
- Thrust Ball Bearing 51118 ID:90MM OD:120MM TH:22MM Cr (kN):59.7 Cor(kN):190 N.W.:0.680kgs
-
- Thrust Ball Bearing 51117
- Thrust Ball Bearing 51117 ID:85MM OD:110MM TH:19MM Cr (kN):45.9 Cor(kN):150 N.W.:0.460kgs
-
- Thrust Ball Bearing 51116
- Thrust Ball Bearing 51116 ID:80MM OD:105MM TH:19MM Cr (kN):44.6 Cor(kN):141 N.W.:0.430kgs