Slewing Baring VSI 250955 N 1055*810*80 MM For Ship Loader/Unloader

Slewing baring VSI 250955 N 1055*810*80 MM for Ship Loader/Unloader

Bearing factory model: VSI 250955 N   

China Bearing old type: vsi 250955 n

Material 42CrMo, 50Mn

Rolling LYC ball

Teeth data

Do 830mm

M 10

Teeth number 83

Bearing boundary Dimension:1055X810X80 MM

ID(inner diameter)/:810 MM

OD(outer diameter):1055 MM

Width/Height/thickness:80 MM

Basic dynamic load rating, Radial Cr:330 KN

Basic static load rating, Radial Cor:1280 KN

Quality standard:GB/T 307 Rolling bearing-measuring and gauging principles and methods

Samples:Available

Radial clearance:C1 C2 C3 Gruop available.

Rolling Body:ball Bearings

The bearing working speed:800 rpm

Lubrication:Oil or Grease oil hole and oil groove in the outer ring

The Number of Rows:Single

Transport Package:Inside package: plastic film + kraft paper + blue tape; Outside package: standard export free-fumigation wooden case.

Trademark:JHB or OEM required

Bearing boundary inch size:41.53”x31.88x3.14”

Bearing outer diameter inch:41.53 inch size

Bearing inner diameter inch size:31.88 inch size

Bearing height inch:3.14 inch size

VSI 250955 N  Slewing rings are sealed on both sides, lubricated with a high quality grease, can be re lubricated via lubrication nipples and are particularly easy to fit.  The bearing rings are supplied without gear teeth or, in order to achieve simple drive solutions, are available with external or internal gear teeth.
slewing rings are designed as:four point contact bearings
these slewing rings without preload are robust and proven under very demanding operation;  they place only slight demands on the flatness and perpendicularity of the adjacent construction. They are suitable for applications with low requirements for accuracy and rigidity of the bearing arrangement, for example in simple metalworking machines, wind power equipment and construction machinery The VSI 250955 N bearing outer diameter:1055mm,Inner diameter:810mm,Height:80mm, It is the light series bearing structure with internal teeth.