SL04220-PP-2NR Full Complement Cylindrical Roller Bearing Price
The SL04220-PP-2NR bearing is a cylindrical roller bearing with an inner diameter of 220 mm , an outer diameter of 300 mm, a width of 95 mm. It typically uses ISO492 grade precision tolerances and seals on both sides type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Description: SL04220-PP-2NR full complement cylindrical roller bearing, bearing used for rope sheave
Part number: SL04220-PP-2NR rope sheave bearing
Inner dia: 220mm
Outer dia: 300mm
Width: 95mm
Unit net weight: 19.5kg
Structure: full complement cylindrical roller
Availability: in stock
M.I.Q.: 1 pcs
Packing condition: single box
Brand: as per requirement
Directions for mounting and dismounting: during the mounting of cylindrical roller bearings, mounting forces should be applied only to the bearing ring to be mounted; Mounting forces must not be directed through the cylindrical rollers. During dismounting of the bearings, the dismounting forces must not be directed through the fasteners on the split inner ring.
The annular slots in the bearing outer ring allow simple axial positioning of the rope sheave by means of retaining rings. The retaining rings are not included in the scope of delivery. In the case of the design 2NR, each bearing is supplied with two retaining rings.
Application instrcutions: Rope sheave bearings are normally subjected to circumferential load on the outer ring. The outer ring must therefore have a press fit. Joint pressures between pmin = 2 N/mm2 and pmax = 25 N/mm2 have proved effective both in tests and in practical applications. The decisive factors in this case are as follows: ■ There is circumferential load on the outer ring ■ Oblique tension occurs, leading to axial and tilting moment loads ■ The axial loads occurring cannot be securely transmitted by the retaining rings. Transmission of the axial loads is only possible if sufficient joint pressure is present. ■ At the possible operating temperatures of –40 °C to +80 °C, the modulus of elasticity of plastic rope sheaves leads to differences in behaviour: – temperatures above +20 °C lead to significant expansion – temperatures below +20 °C lead to significant contraction.Due to the operating conditions present in rope sheave bearing arrangements, an interference fit between the outer ring and rope sheave is absolutely critical in order to achieve correct bearing function and load transmission. The joint pressure must be between pmin = 2 N/mm2 and pmax = 25 N/mm2.
Share this product to:
Let more people see your product
-
- NU218E cylindrical roller bearing
- NU218E single row cylindrical roller bearing. Single row cylindrical roller bearings are manufactured
-
- NU228E bearing
- NU228E single row cylindrical roller bearing. Single row cylindrical roller bearings are manufactured
-
- NU309E bearing
- NU309E single row cylindrical roller bearing Single row cylindrical roller bearings are manufactured
-
- NU330E bearing
- NU330E single row cylindrical roller bearing. Single row cylindrical roller bearings are manufactured
-
- 200TVL850 angular contact thrust ball bearing, TVL type
- Bearing number: 200TVL850 angular contact thrust ball bearing M.I.Q.: one (1) pcs Packing:
-
- 202TVL620 angular contact thrust ball bearing, TVL type
- Bearing number: 202TVL620 angular contact thrust ball bearing M.I.Q.: one (1) pcs Packing:
-
- 227TVL302 angular contact thrust ball bearing, TVL type
- Bearing number: 227TVL302 angular contact thrust ball bearing M.I.Q.: one (1) pcs Packing:
-
- 233TVL303 angular contact thrust ball bearing, TVL type
- Bearing number: 233TVL303 angular contact thrust ball bearing M.I.Q.: one (1) pcs Packing: