| RSCI130 One Way Clutches Sprag Type (130x322x90mm) Overrunning clutches Freewheel Clutch Flender Gearbox clutch | |||||||||||||||||||||||
| A . One Way Clutches Sprag Type Parameters | |||||||||||||||||||||||
| Brand- | TMP | ||||||||||||||||||||||
| Model number- | RSCI130 | ||||||||||||||||||||||
| Inner ring(mm)- | 130 | ||||||||||||||||||||||
| Outer ring(mm)- | 322 | ||||||||||||||||||||||
| Width(mm)- | 90 | ||||||||||||||||||||||
| Weight(Kg)- | 35 | ||||||||||||||||||||||
| Drag torque(Nm)- | 15750 | ||||||||||||||||||||||
| Materials- | GCR15 | ||||||||||||||||||||||
| Series- | RSCI | ||||||||||||||||||||||
| Lubrication type- | Grease/oil | ||||||||||||||||||||||
| Clutch type- | Sprag | ||||||||||||||||||||||
| Precision- | P0 | ||||||||||||||||||||||
| Structure- | Type RSCI is a centrifugal lift off sprag type freewheel with the inner race rotating. | ||||||||||||||||||||||
| B . RSCI130 One Way Clutches Sprag Type Specification Sheet | |||||||||||||||||||||||
| Model Number |
Size | Torgue | Speeds(r/min) | Diameter(mm) | Number | Diameter(mm) | Weight(kg) | ||||||||||||||||
| d | TKN1 (Nm) |
n max |
ni min |
ni max |
D | D1 | D2 | D3 | D4 | z | L | I | I1 | I4 | fx45 | dmin | m | tmin | I2 | I3 | RSCI | F8 | |
| RSCI130 | 130 | 15750 | 135 | 330 | 2400 | 322 | 170 | 240 | 278 | M16 | 12 | 90 | 80 | 52.6 | 5 | 3 | 210 | 18.6 | 3 | 15 | 37 | 35 | 6 |
| C . RSCI Series One Way Clutches Sprag Type Details | |||||||||||||||||||||||
|
Product Features |
One Way Clutches Sprag Type mainly used as Backstop clutches(Most suitable as backstops, and mostly the contact-free versions); continuously during operation. The freewheel prevents reverse rotation if the drive is disconnected. |
||||||||||||||||||||||
|
Series Introduction |
Type RSCI is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. It is a non self- supported type.Bearings must be provided to ensure concentricity of the inner and outer races support axial and radial loads, as shown overleaf. Concentricity and run-out limits must be observed. The RSCI type accepts all types of lubricant currently used in power transmission equipment. It is possible to mount these freewheels directly in gear-boxes without separate lubrication. An oil mist is generally sufficient. Grease lubrication may be acceptable if the unit works mostly in overrunning condition, as on E-motors.When used as a backstop, it must be checked that the overrunning speed will not go below the minimum speed given in the characteristics table. |
||||||||||||||||||||||
|
Series Model No. |
RSCI20 RSCI25 RSCI30 RSCI35 RSCI40 RSCI45 RSCI50 RSCI60 RSCI70 RSCI80 RSCI80M RSCI90 RSCI90M RSCI100 RSCI100M RSCI130 RSCI180 RSCI180 M RSCI180 II RSCI180 II-M RSCI220 RSCI220 M RSCI220 II RSCI220 II-M RSCI240 RSCI240 M RSCI240 II RSCI240 II-M RSCI260 RSCI260 M RSCI260 II RSCI260 II-M RSCI300 RSCI300 M RSCI300 II RSCI300 II-M |
||||||||||||||||||||||
| Applications |
Reducers , Flender Gearbox ,SEW Gearbox; driven machine from the driving or a variable speed. overrunning clutch acts as a brake. |
||||||||||||||||||||||












