RKS.062.20.0944 Slewing Bearing
The RKS.062.20.0944 bearing is a Slewing Bearing with an inner diameter of 841.6 mm , an outer diameter of 1016 mm, a width of 69 mm. It typically uses P4 grade precision tolerances and ZZ type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
RKS.062.20.0944 Slewing bearing 841.6X1016X56mm
Technical:
RKS.062.20.0944 Four point contact ball slewing bearing (Internal gear teeth)
dm 944 mm
d 841.6 mm
D 1016 mm
H 56 mm
Je 990 mm
Ji 905 mm
Ca 276 KN Basic dynamic load rating, axial
Cao 2100 KN Basic static load rating, axial
Mass 69 kg
Structure:four point contact ball slewing bearing
Gear teeth: internal
Seals type:double seals
Material: 52100/100Cr6/GCr15
Product description: RKS.062.20.0944 slewing bearing with an internal gear belongs to SKF RKS medium size four point contact ball slewing bearing
1.Your inquiry to our product & price will be replied within 24 hours.
2.OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
3.Your business relationship with us will be confidential to any third party.
Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.
2. Withstands force in any direction. Alternately crossed rollers 45º angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80℃ . If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence,Do not tighten bolts randomly.
Cautions:
1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range,please contact LDB.
2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.
3.Please do not remove or apply force to the bolt and nut of the split bearing
Share this product to:
Let more people see your product
-
- F-QW1250.40 Slewing Bearing 1084*1476*110mm
- we can manufacture F-QW1250.40 Slewing Bearing.If you have the request
-
- D8788/830 slewing bearing 830*1040*101mm
- we can manufacture D8788/830 Slewing Bearing . If you
-
- D5792/900 Slewing Bearing 900*1150*90mm
- we have the stock in D5792/900 Slewing Bearing .If you have the
-
- P4 Precision XA 120235N Slewing bearing 171*318.8*40mm
- we have the stock in XA 120235N Cross roller Bearing.If you have
-
- RMS 14 inch size deep groove ball bearing
- There are large available stocks in RMS 14 inch size deep groove
-
- RMS 16 inch size deep groove ball bearing
- There are large available stocks in RMS 16 inch size deep groove
-
- NUP2209 cylindrical roller bearing 45*85*23mm
- we have the NUP2209 cylindrical roller bearing in stock.If you have the
-
- RMS 18 inch size deep groove ball bearing
- There are large available stocks in RMS 18 inch size deep groove