 |
RE11012UUCC0P5 110*135*12mm Harmonic Drive Crossed Roller Bearing
RE11012UUCC0P5 110*135*12mm Harmonic Drive crossed roller Bearing
| Shaft diameter | Model No. | Major dimensions | Shoulder dimensions |
Basic load rating (radial) |
Mass | |||||||
| Inner diameter d |
Outer diameter D |
Width B B1 |
Greasing hole | Chamfer rmin | ds | Dh | C kN |
C0 kN |
kg | |||
| a | b | |||||||||||
| 110 | RE11012 | 110 | 135 | 12 | 2.5 | 1 | 0.6 | 117 | 127 | 12.5 | 24.1 | 0.4 |
Types of the Cross-Roller Ring
Types and Features
Model RU (Integrated Inner/Outer Ring Type)
Since holes are drilled for mounting, the need for a presser fl ange and a housing is eliminated. Also, owing to the integrated inner/outer ring type stryucture with washer, there is almost no effect from installation on performance, allowing stable rotational accuracy and torque to be obtained. Can be used for both outer and inner ring rotation.
Model RB (Separable Outer Ring Type for Inner Ring Rotation)
Cross-Roller Ring basic type, with a separable outer ring, and an inner ring integrated with the main body.It is used in locations where the rotational accuracy of the inner ring is required. It is used, for example, in the swivel portions of index tables of machine tools.
Model RE (Two-piece Inner Ring Type for Outer Ring Rotation)
Main dimensions are the same as model RB. This model is used in locations where the rotational accuracy of the outer ring is required.
Model RA (Separable Outer Ring Type for Inner Ring Rotation)
A compact type similar to model RB with the thinnest possible inner and outer rings. Optimal for locations requiring a light-weight and compact design such as the swivel portions of robots and manipulators.
Share this product to:
Let more people see your product
-
- RB29014014 crossed roller bearing
- Increased Rigidity (Three to Four Times Greater than the Conventional Type) Unlike
-
- CSF14-3516 9*55*16.5mm Crossed roller bearing for Harmonic Drive Servo Actuator
- Harmonic gear bearings Cross cylindrical roller structure, divided according to their use
-
- CSF25-6218 20*85*18.5mm High Load Capactity And High Higidity Crossed Roller Bearing
- Harmonic gear bearings Cross cylindrical roller structure, divided according to their use
-
- CSF65-16039 44*210*39mm csf harmonic drive special bearing for robot
- Harmonic gear bearings Cross cylindrical roller structure, divided according to their
-
- Mud Stack Thrust Angular Contact Mud Motor Bearings , Dual Ball Bearing 128916M
- The bearings in a mud motor at the end of a drill
-
- TC bearing 128718M
- Whether you’re drilling for oil or gas, the bearings in a mud
-
- 128713K Full Complement Monton Mud Motor Bearings For Drill Motor With Codes
- Special steel for all bearing components • Full complement bearing • Precision matched
-
- mud motor bearings ,mud lubricated thrust bearings 128723M
- Whether you’re drilling for oil or gas, the bearings in a mud
