RB29014014 Crossed Roller Bearing
The RB29014014 bearing is a Crossed roller bearing with an inner diameter of 140 mm , an outer diameter of 290 mm, a width of 16 mm. It typically uses P4 grade precision tolerances and features a brass cage, It primarily bears Thrust, Its dynamic radial rated load is approximately 750KN, its static radial rated load is approximately 2500KN. It uses C0 standard radial clearance, No seals type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Feature: Cylindrical roller bearing
Application: Twin screw extruder gearbox
RB29014014
Structure and Features
With the Cross-Roller Ring, cylindrical rollers are arranged with each roller perpendicular to the adjacentroller, in a 90° V groove, separated from each other by a spacer retainer. This design allows just one bearing to receive loads in all directions including radial, axial and moment loads.
Since the Cross-Roller Ring achieves high rigidity despite the minimum possible dimensions of the inner and outer rings, it is optimal for applications such as joints and swiveling units of industrial robots, swiveling tables of machining centers, rotary units of manipulators, precision rotary tables, medical equipment, measuring instruments and IC manufacturing machines.
High Rotation Accuracy
The spacer retainer fitting among cross-arrayed rollers prevents rollers from skewing and the rotational torque from increasing due to friction between rollers. Unlike conventional types using steel sheet retainers, the Cross-Roller Ring does not cause unilateral contact of roller or seize. Thus, even under a preload, the Cross-Roller Ring provides stable rotation.
Since the inner and outer rings are designed to be separable, the bearing clearance can be adjusted.
In addition, a preload can be applied. These features enable accurate rotation.
Easy Handling
The inner and outer rings, which are separable, are secured to the Cross-Roller Ring body after being installed with rollers and spacer retainers in order to prevent the rings from separating from each other. Thus, it is easy to handle the rings when installing the Cross-Roller Ring.
Skewing Prevention
The spacer retainer keeps rollers in their proper position, thereby preventing them from skewing(tilted rollers). This eliminates friction between rollers, and therefore secures a stable rotational torque.
Increased Rigidity (Three to Four Times Greater than the Conventional Type) Unlike the thin angular ball bearings installed in double rows, the cross array of rollers allows a single Cross-Roller Ring unit to receive loads in all directions, increasing the rigidity to three to four times greater than the conventional type.
Share this product to:
Let more people see your product
-
- RB29014014 crossed roller bearing
- Increased Rigidity (Three to Four Times Greater than the Conventional Type) Unlike
-
- CSF14-3516 9*55*16.5mm Crossed roller bearing for Harmonic Drive Servo Actuator
- Harmonic gear bearings Cross cylindrical roller structure, divided according to their use
-
- CSF25-6218 20*85*18.5mm High Load Capactity And High Higidity Crossed Roller Bearing
- Harmonic gear bearings Cross cylindrical roller structure, divided according to their use
-
- CSF65-16039 44*210*39mm csf harmonic drive special bearing for robot
- Harmonic gear bearings Cross cylindrical roller structure, divided according to their
-
- Mud Stack Thrust Angular Contact Mud Motor Bearings , Dual Ball Bearing 128916M
- The bearings in a mud motor at the end of a drill
-
- 128718M TC bearing Tungsten Carbide Radial Bearings
- Whether you’re drilling for oil or gas, the bearings in a mud
-
- 128713K Full Complement Monton Mud Motor Bearings For Drill Motor With Codes
- Special steel for all bearing components • Full complement bearing • Precision matched
-
- mud motor bearings ,mud lubricated thrust bearings 128723M
- Whether you’re drilling for oil or gas, the bearings in a mud