Pillow Block Ball Bearing UC216

Pillow block ball bearing is a variant of deep groove ball bearings, it characterized by its outer diameter surface of the sphere, can be blended with a corresponding concave spherical bearing in mind the role played tune.

   Its basic properties and deep groove ball bearings should be similar, but because of this relatively rough bearing most of the machinery used in the installation orientation is not precise enough, the hole axis and the seat of the neutral axis of difference, or long-axis deflection the case of large, etc., and also bearing their accuracy is not high enough, some structure is relatively rough, so compare with  the actual performance of the same performance specifications deep groove ball bearings Yaoda quite a discount. For example: with the top wire of the outer spherical ball bearings used in large stiffness difference through shaft deflections, such bearings with seals on both sides, to close to prevent dirt intrusion, the factory had the right amount of lubricant filling.

  Without cieaning, without injecting lubricant  before installation, the bearings protruding wire screw terminal on the top of the shaft are tightened. Permissible dynamic axial load shall not exceed the rated load of 20%.

We have the below part number for P200 UC200 series ball bearing pillow blicks.

P201 UC201 P202 UC202 P203 UC203 P204 UC204 P205 UC205 P206 UC206 P207 UC207 P208 UC208 P209 UC209 P210 UC210 P211 UC211 P212 UC212 P213 UC213 P214 UC214 P215 UC215 P216 UC216 P217 UC217 P218 UC218

The pillow block ball bearing is composed of a single row deep groove ball bearing with seals at both sides and spherical ourside surface, and a housing, suitable for simple support, widely used in varieties of mechanical epuipment, esprcially for agricultural, metallurgical, textile and printing machinery.

Please check the below bearing detail.

Share this product to:     Let more people see your product