N1010 Bearings
N1010
Bore Diameter:50 mm
Outside Diameter:80 mm
Width:16 mm
Weight:0.14 kg
The N1010 bearing is a Precison cylindrical Roller bearings with an inner diameter of 50 mm , an outer diameter of 80 mm, a width of 16 mm. It typically uses P0 grade precision tolerances and Sealed type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Cylindrical Roller Bearing from AST BearingsCylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings. As such, the rollers have a greater (linear) contact area with the outer ring and are distribute loads across a broader surface. Subsequently, they have a relatively high radial load capacity and are suitable for high speeds. Double-row cylindrical roller bearings have high radial rigidity and are used primarily for precision machine tools.
Depending on the series as defined below a number of cylindrical roller bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other which can be used as free-end bearings.
Pressed steel (with or without tins or fins) or machined brass cages are generally used, but sometimes molded polyamide cages are also available depending on the application. Cylindrical Roller Bearings are also available without cages with a full complement of rollers. This allows even higher loads but at the expense of speed.
Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464.
There are different types designated NU, NJ, NUP, N, NF for single-row bearings, and NNU, NN for double-row bearings depending on the design or absence of side ribs. AST’s cylindrical roller bearings come in the following series with various cage designs and Metric dimensions:
N Series - Bearings of N design are single row cylindrical roller bearing and have two fixed ribs on the inner ring that retain the rollers and cage and one smooth outer ring. This design allows an axial displacement in certain limits, of the shaft in relation to the housing. Therefore, N Series rolling bearings are used in non-locating bearing units. Also, the N Series bearings have virtually no thrust capacity.
| Outerbearings | Outer | Ass. | Load | PRM | Rr | Weight | ||||||||
| d | D | B | Rsmin | E | da | Da | Ra | Cr | Cor | L. | Oil | Rr | ≈ | |
| mm | min | max | max | KN | r/min | N/μm | Kg | |||||||
| N1010 | 50 | 80 | 16 | 1 | 67.5 | 48.5 | 69 | 0.6 | 32.5 | 35.5 | 13000 | 15000 | 0.5 | 0.29 |
Share this product to:
Let more people see your product
-
- N1026 bearings
- Cylindrical roller bearings of this type are double row precision bearings for
-
- N1021 bearings
- 10 Series - Bearings of N design are single row cylindrical roller
-
- N1016 bearings
- N10 Series - Bearings of N design are single row cylindrical roller
-
- N1017 bearings
- 10 Series - Bearings of N design are single row cylindrical roller
-
- N1013 bearings
- N10 Series - Bearings of N design are single row cylindrical roller
-
- NN3006K/W33P4
- cylindrical roller bearings are available in many designs, series and sizes.
-
- NN3013K/W33P4
- cylindrical roller bearings are available in many designs, series and sizes.
-
- N1017 bearings
- 10 Series - Bearings of N design are single row cylindrical roller