Multi-stages 6 Row Sleeve Tandem Roller Bearing F-84897.T6AR

🔍

F-84897.T6AR

Bore Diameter:19 mm

Outside Diameter:66 mm

Width:145 mm

Reference FOB Price:US100 ~ 1000 / Piece

Min. Order:10 Piece

Bearing factory Number:F-84897.T6AR Item code：F-84897.T6AR Roller row number:six rows

The F-84897.T6AR bearing is a Extruder Tandem roller Bearing with an inner diameter of 19 mm , an outer diameter of 66 mm, a width of 145 mm. It typically uses P5 P4 Grade grade precision tolerances and features a Brass or Nylon cage, It primarily bears Radial, Its dynamic radial rated load is approximately 420, its static radial rated load is approximately 1300. together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Application: single and twin screw extruders gearbox

Dimensions:

Inside Diameter:

19 mm

Outside Diameter:

66 mm

Thickness:

145 mm

Performance Data:

Dynamic load Capacity, Radial (Cr):

420

Static load Capacity, Radial (C0r):

1300

Specifications:

Old Designations:

f-84897.t6ar

HS Code:

8482500090

Structure:

Thrust cylindrical roller bearing

Number of Rows:

6 rows

Demensions:

19x66x145mm

Precision Rating:

P5 P4 Grade

Load Direction:

Radial

Bearing Material:

Steel

Cage Type:

windows

Cage material:

Brass or Nylon

Transaction Information:

Transport Package:

carton

Shipping Ways:

By Sea or By air

Country of Origin:

China Luoyang

Stock:

500 Piece

Production Capacity:

1000PCS/ 6 months

Port:

shanghai or qingdao

Payment term:

T/T,L/C

Delivery time:

in stock

Detailed description

Multi-stages 6 Row Sleeve Tandem Roller Bearing F-84897.T6AR

Bearing factory Number:F-84897.T6AR
Item code:F-84897.T6AR
Roller row number:six rows
Structure:Basic Type Tandem Thrust Cylindrical Roller Bearing
Original place:China LuoYang
Cage material:brass or AL or Nylon cage
Lubrication:Oil lubrication
Load direction:Radial direction
Boundary metric size: 19X66X145mm
Outer diameter D:66mm
Inner diameter d:19mm
The total height:145mm
Bore: Cylindrical bore
HS Code:8482500090
We manufacture two, three, four, six and eight stage bearings in both inch and metric
series. Bore sizes range from about 1 to 22 inches with corresponding outside diameters ranging from 3.5 to 42 inches. tandem thrust bearings are supplied to original equipment manufacturers and the aftermarket.

Tandem thrust cylindrical roller bearings have a limited radial cross-section, super axial load capacity, long-term working life and minimum friction loss, so they are obtained in the parallel twin screw extruder gear transmission box in the rubber and plastics industry Very successful application. It will also be popularized and applied in other mechanical equipment.

Tandem bearings have the following structural types:
1.)The basic type tandem bearing is to connect the shaft ring, the seat ring and the roller-cage assembly through the elastic spacer. This type of bearing is a separate structure, the parts can be disassembled, and it must be carefully installed and disassembled according to the numbering sequence provided by our company.

2.)The tandem bearing with shaft is a modified structure bearing. A shaft is inserted in the inner hole of the basic tandem bearing, and the bearing is fixed on the shaft with an elastic lock ring. The bearing parts of this type are inseparable, and it is very convenient to install and dismount the whole bearing during use.

3.)Tandem bearing with sleeve, sleeve is sleeved on the outside of the basic tandem bearing.

When using tandem bearings, the following recommendations should be adhered to:
1. Preload: 1% of the dynamic basic load rating. The dynamic basic load rating of each tandem bearing . Figures not listed will be provided by out institute on request.
2. Radial guidance: full complement cylindrical roller bearings or needle roller bearings can be used.
3. Eliminate tilting: the supporting parts must be machined to eliminate any tilting.
4. Mounting tolerances: recommended the following mounting tolerances: shaft f6 and housing bore F7.
5. Lubrication: tandem bearings must always be lubricated by oil circulation.
6. if you have the technology problem, Please contact us, we can offer the solve the solution for you.

Share this product to:

Let more people see your product

How can you buy Multi-stages 6 Row Sleeve Tandem Roller Bearing F-84897.T6AR on the Internet?
High quality F-84897.T6AR ( ID: 19 mm OD: 66 mm WD: 145 mm , 6 rows Rows , P5 P4 Grade Accuracy Class , Steel Material , 420 Radial dynamic , 1300 Radial static ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. F-84897.T6AR. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- Tandem thrust roller bearing T3AR2468A 24X68X70mm
- The thrust cylindrical roller bearing T3AR2468A with size 24x68x70mm, the inner diameter:24
- Feed extruder gearbox use roller bearing M3CT2468 24X68X70mm
- The thrust cylindrical roller bearing M3CT2468 with size 23x85x97mm
- T3AR38150 feed extruder bearings 38x150x163mm
- The thrust cylindrical roller bearing T3AR38150 with size 38x150x163mm, the inner
- M5CT1242 food feed extruder multi-stage tandem bearings
- M5CT1242 is 5 stages thrust roller bearing with inner dia:12mm size,outer
- HCB71902-E-T-P4S, HCB71902ETP4S, HCB71902 super precision bearing
- Description: Super Precision ball bearing Type: HCB71902-E-T-P4S, HCB71902ETP4S, HCB71902 super ball precision
- NN3072-AS-K-M-SP bearing 360x540x134 mm
- NN3072-AS-K-M-SP cylindrical roller bearing Dimension:360x540x134 mm, delivery time: in stock, if unavailable
- NJ2214, NJ2214E, NJ2214M, NJ2214ECP, NJ2214ETVP2 Cylindrical roller bearing
- Description: Single row cylindrical roller bearing Type: NJ2214, NJ2214E, NJ2214M, NJ2214ECP, NJ2214ETVP2
- NU 2372 Double Twist Buncher bearing
- Current Code:NU 2372 original code:32672 Dimension:360x750x224 mm Class:P5 P6 P0 Weight:485 kgs The cage

Multi-stages 6 Row Sleeve Tandem Roller Bearing F-84897.T6AR

F-84897.T6AR Related Products »

Product Groups

Information

Category