Multi-stage Tandem Thrust Cylindrical Roller Bearing M8CT30127
small radial design envelope ■ high axial forces ■ long operating life ■ low frictional energy.
The M8CT30127 bearing is a Extruder Tandem roller Bearing with an inner diameter of 30 mm , an outer diameter of 127 mm, a width of 327 mm. It typically uses P5 P4 Grade grade precision tolerances and features a Brass or Nylon cage, steel rings. It primarily bears Radial, Its dynamic radial rated load is approximately 1450, its static radial rated load is approximately 8300. It uses C0 C3 standard radial clearance, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Feature: tandem roller bearing
Application: extrusion equipment gearbox roller bearings
Multi-stage Tandem thrust cylindrical roller bearing M8CT30127
Bearing factory Number: M8CT30127
Item code: m8ct30127
Roller row number:eight rows
Structure:Basic Type Tandem Thrust Cylindrical Roller Bearing
Original place:China LuoYang
Cage material:brass or AL or Nylon cage
Lubrication:Oil lubrication
Load direction:Radial direction
Boundary metric size: 30*127*327MM
Outer diameter D:127mm
Inner diameter d:30mm
The total height:327mm
Bore: Cylindrical bore
HS Code:8482500090
Tandem thrust cylindrical roller bearings have a limited radial cross-section, super axial load capacity, long-term working life and minimum friction loss, so they are obtained in the parallel twin screw extruder gear transmission box in the rubber and plastics industry Very successful application. It will also be popularized and applied in other mechanical equipment.
Tandem bearings have the following structural types:
1.)The basic type tandem bearing is to connect the shaft ring, the seat ring and the roller-cage assembly through the elastic spacer. This type of bearing is a separate structure, the parts can be disassembled, and it must be carefully installed and disassembled according to the numbering sequence provided by our company.
2.)The tandem bearing with shaft is a modified structure bearing. A shaft is inserted in the inner hole of the basic tandem bearing, and the bearing is fixed on the shaft with an elastic lock ring. The bearing parts of this type are inseparable, and it is very convenient to install and dismount the whole bearing during use.
3.)Tandem bearing with sleeve, sleeve is sleeved on the outside of the basic tandem bearing.
Share this product to:
Let more people see your product
-
- Multi-stage Tandem bearing T-33105.3A 33*105*115mm in stock
- T-33105.3A bearing highlights:The Axial Forces Are Supported By A three-Stage Tandem Bearing
-
- T3AR38150 feed extruder bearings 38x150x163mm
- The thrust cylindrical roller bearing T3AR38150 with size 38x150x163mm, the inner
-
- food extruder multi-stage bearings M2CT3278 Size 32*78*57.5MM
- The bearing M2CT3278 with high speed rotating that can carry axial direction
-
- Parallel twin screw extrudes Tandem Bearings M4CT2060 20x60x101mm
- The thrust cylindrical roller bearing M4CT2060 with size 20x60x101mm,
-
- NCF 29/1000 V full complete cylindrical roller bearing
- Current Code:NCF 29/1000 V Dimension:1000x1320x185mm Class:P5 P6 P0 Weight: 680 kgs The forging material:GCr15SiMn
-
- TTSX440(4379/440) screw down bearing
- Current Code:TTSX440 Old code:4379/440 Dimension:380x440x152mm Weight:160 kgs The forging material:G20Cr2Ni4A( Case carburization) The delivery time:40-50
-
- 230/1060 230/1060 CA /W33 230/1060 CC 230/1060 CC/W33 Bearing
- Current Code:230/1060 or 230/1060 CA /W33 230/1060 CC
-
- HCB7003-C-T-P4S, HCB7003CTP4S, HCB7003 super precision bearing
- Description: Super Precision ball bearing Type: HCB7003-C-T-P4S, HCB7003CTP4S, HCB7003 super ball precision