Multi-Stage Cylindrical Roller Thrust Bearings Twin Extruder Gearbox F-50952

🔍

F-50952

Bore Diameter:23 mm

Outside Diameter:70 mm

Width:161 mm

Reference FOB Price:US100 ~ 1000 / Piece

Min. Order:10 Piece

small radial design envelope ■ high axial forces ■ long operating life ■ low frictional energy.

The F-50952 bearing is a Extruder Tandem roller Bearing with an inner diameter of 23 mm , an outer diameter of 70 mm, a width of 161 mm. It typically uses P5 P4 Grade grade precision tolerances and features a Brass or Nylon cage, steel rings. It primarily bears Radial, Its dynamic radial rated load is approximately 186, its static radial rated load is approximately 334. It uses C0 C3 standard radial clearance, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Feature: tandem roller bearing

Application: single and twin screw extruders gearbox

Dimensions:

Inside Diameter:

23 mm

Outside Diameter:

70 mm

Thickness:

161 mm

Performance Data:

Dynamic load Capacity, Radial (Cr):

186

Static load Capacity, Radial (C0r):

334

Specifications:

Old Designations:

F-50952

HS Code:

8482500090

Structure:

Thrust cylindrical roller bearing

Number of Rows:

6 rows

Demensions:

23*79*161mm

Radial Clearance Trade No.:

C0 C3

Precision Rating:

P5 P4 Grade

Load Direction:

Radial

Bearing Material:

Steel

Cage Type:

windows

Cage material:

Brass or Nylon

Roller Material:

steel

Transaction Information:

Transport Package:

carton

Service:

Offer technology service

Shipping Ways:

By Sea or By air

Country of Origin:

China Luoyang

Stock:

500 Piece

Production Capacity:

1000PCS/ 6 months

Port:

shanghai or qingdao

Payment term:

T/T,L/C

Delivery time:

in stock

Detailed description

Multi-Stage Cylindrical Roller Thrust Bearings Twin Extruder Gearbox F-50952

Bearing factory Number: F-50952
Item code: F-50952
Roller row number:six rows
Structure:Basic Type Tandem Thrust Cylindrical Roller Bearing
Original place:China LuoYang
Cage material:brass or AL or Nylon cage
Lubrication:Oil lubrication
Load direction:Radial direction
Boundary metric size: 23X79X161mm
Outer diameter D:79mm
Inner diameter d:23mm
The total height:161mm
Bore: Cylindrical bore
HS Code:8482500090
We manufacture two, three, four, six and eight stage bearings in both inch and metric
series. Bore sizes range from about 1 to 22 inches with corresponding outside diameters ranging from 3.5 to 42 inches. tandem thrust bearings are supplied to original equipment manufacturers and the aftermarket.

Tandem bearings have the following structural types:
1.)The basic type tandem bearing is to connect the shaft ring, the seat ring and the roller-cage assembly through the elastic spacer. This type of bearing is a separate structure, the parts can be disassembled, and it must be carefully installed and disassembled according to the numbering sequence provided by our company.

2.)The tandem bearing with shaft is a modified structure bearing. A shaft is inserted in the inner hole of the basic tandem bearing, and the bearing is fixed on the shaft with an elastic lock ring. The bearing parts of this type are inseparable, and it is very convenient to install and dismount the whole bearing during use.

3.)Tandem bearing with sleeve, sleeve is sleeved on the outside of the basic tandem bearing.

When using tandem bearings, the following recommendations should be adhered to:
1. Preload: 1% of the dynamic basic load rating. The dynamic basic load rating of each tandem bearing . Figures not listed will be provided by out institute on request.
2. Radial guidance: full complement cylindrical roller bearings or needle roller bearings can be used.
3. Eliminate tilting: the supporting parts must be machined to eliminate any tilting.
4. Mounting tolerances: recommended the following mounting tolerances: shaft f6 and housing bore F7.
5. Lubrication: tandem bearings must always be lubricated by oil circulation.
6. if you have the technology problem, Please contact us, we can offer the solve the solution for you.

Share this product to:

Let more people see your product

How can you buy Multi-Stage Cylindrical Roller Thrust Bearings Twin Extruder Gearbox F-50952 on the Internet?
High quality F-50952 ( ID: 23 mm OD: 70 mm WD: 161 mm , 6 rows Rows , C0 C3 Radial Clearance , P5 P4 Grade Accuracy Class , Steel Material , 186 Radial dynamic , 334 Radial static ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. F-50952. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- Six stages tandem thrust bearings M6CT2866 size 28x66x162.5mm
- M6CT2866 is6stages thrust roller bearing with inner dia:28mm size,outer diameter:66mm
- food extruder gearbox tandem bearing T3AR420 4x20x32mm
- The thrust cylindrical roller bearing T3AR420 with size 4x20x32mm, the
- Plastic Extrudes Machine thrust bearings M6CT3495 34X95X196mm
- The thrust cylindrical roller bearing M6CT3495 with size 34X95X196mm , the
- Multi-stage Tandem bearing Cylindrical Roller Thrust Bearing M4CT1858 18x58x101mm
- The thrust cylindrical roller bearing M4CT1858 with size
- HCB71918-C-T-P4S main spindle bearing
- Description: Machine tool main spindle bearing Type: HCB71918-C-T-P4S bearing Machine tool main spindle
- XCB71907-E-T-P4S, XCB71907ETP4S, XCB71907 super precision bearing
- Description: Super Precision ball bearing Type: XCB71907-E-T-P4S, XCB71907ETP4S, XCB71907 super ball
- N1917-K-M1-SP bearing 85x120x18mm
- Cylindrical roller bearings N1917-K-M1-SP non-locating bearing, with tapered bore, taper 1:12,
- HCB71813-C-TPA-P4-UL bearing
- Description: Machine tool main spindle bearing Type: HCB71813-C-TPA-P4-UL bearing Machine tool main spindle

Multi-Stage Cylindrical Roller Thrust Bearings Twin Extruder Gearbox F-50952

F-50952 Related Products »

Product Groups

Information

Category