MMXC1922 Crossed Roller Bearing
The MMXC1922 bearing is a Cross roller bearing with an inner diameter of 110 mm , an outer diameter of 150 mm, a width of 20 mm. It typically uses P4 grade precision tolerances and ZZ type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
MMXC1922 Crossed roller bearing 110X150X20mm
Technical:
| PART NO. | d (mm) | D (mm) | B (mm) | Load Rating | Limiting speed min-1 |
|
| C (kN) | Co (kN) | |||||
| MMXC1922 | 110 | 150 | 20 | 41 | 67 | 2200 |
- Structure:Crossed Roller Bearing
- Gear teeth: without
- Seals type:double seals
- Material: 52100/100Cr6/GCr15
- Product description: RIGIA specialized in MMXC1922 Crossed Roller Bearing (SKF specifications), size:110x150x20mm, has high precision and high rigidity.Outer dia. 55mm~720mm.
1.Your inquiry to our product & price will be replied within 24 hours.
2.OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
3.Your business relationship with us will be confidential to any third party.
Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.
2. Withstands force in any direction. Alternately crossed rollers 45º angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80℃ . If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence,Do not tighten bolts randomly.
Cautions:
1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range,please contact LDB.
2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.
3.Please do not remove or apply force to the bolt and nut of the split bearing
Share this product to:
Let more people see your product
-
- RU228 Crossed Roller Bearing
- we have the RU228 Crossed roller bearing in stocks.If you have the
-
- SX011848 Crossed Roller Bearing
- we have the SX011848 corss roller bearing in stocks.If you have the
-
- 615894A Crossed Roller Bearing
- we have the 615894A Crossed roller bearing in stocks.If you have the
-
- CRBS1408 Crossed Roller Bearing
- we have the CRBS1408 Crossed roller bearing in stocks.If you have the
-
- UCPH212 Pillow block bearing
- There are large available stocks in UCPH212 Pillow block bearing.If you have
-
- QJ1064X1 angular contact ball bearing 320*479.5*74mm
- we have the QJ1064X1 angular contact ball bearing in stock.If you have
-
- QJF1040 angular contact ball bearing 200*310*51mm
- we have the QJF1040 angular contact ball bearing in stock.If you have
-
- 395-S/394D double row tapered roller bearing 66.675x110x52.388mm
- we have the 395-S/394D tapered roller bearing in stock.If you have the