Machined Brass Cage 260TAC29DMYPN7+LC7 Super Precision Angular Contact Thrust Ball Bearings
The 260TAC29DMYPN7+LC7 Ultra-precision angular contact thrust ball bearings are designed for high-load, high-speed applications with stringent requirements for axial runout, and are widely used in precision machine tool spindles, ball screws, industrial robot joints, aero-engine accessory transmission systems, and high-precision centrifuges.
The 260TAC29DMYPN7+LC7 bearing is a Super Precision Angular Contact Thrust Ball Bearings, Double-Direction with an inner diameter of 260 mm , an outer diameter of 360 mm, a width of 120 mm. It typically uses PN7 = Special precision grade precision tolerances and Bearing steel (SUJ2) rings, Bearing steel (SUJ2) rolling mlement. Its dynamic axial rated load is approximately 313877 N, its static axial rated load is approximately 1388772 N. together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
260TAC29DMYPN7+LC7 bearings ( 260 mm x 360 mm x 120 mm) have the advantages of perfect balance of rotational accuracy, speed and rigidity, and are therefore widely used in the Machine tools, ball screw, aerospace, medical equipment.
| Part Number | 260TAC29DMYPN7+LC7 |
| Interchangeable | NSK 260TAC29DMYPN7+LC7 |
| Contact Angle [°] | 60 |
| Bearing Type | Super Precision Angular Contact Thrust Ball Bearings, Double-Direction |
| Spacer | L = Inner ring spacer |
| Dimension series | 29D = For combination with NN39 and NN49 series |
| Type | TAC |
| Bearing Mass - m [lb] | 66.7994 |
| Ca Dynamic Axial [lbf] | 70559 |
| C0a Static Axial [lbf] | 312195 |
| nB Speed ratings (grease) [rpm] | 1280 |
| nG Speed ratings (oil) [rpm] | 1482 |
| d φ Inside [inch] | 10.2362 |
| D Φ Outside [inch] | 14.1732 |
| T Inner Ring Width [inch] | 4.7244 |
| C Outer Ring Width [inch] | 2.3622 |
| r min Chamfer [inch] | 0.0827 |
| r1 min Chamfer [inch] | 0.0433 |
| ra max Fillet Radius [inch] | 0.0787 |
| rb max Fillet Radius [inch] | 0.0394 |
| da Abutment Dimensions Shaft [inch] | 11.8110 |
| Da Abutment Dimensions Housing [inch] | 13.5433 |
| Pa Permissible Axial Load [lbf] | 192733 |
| Preload | C7 = Light preload |
| Preload (C7) [lbf] | 1991 |
| Axial rigidity (C7) [N/µm] | 3245 |
| Measured axial clearance (C7) [µm] | -15 |
The core design of ultra-precision angular contact thrust ball bearings lies in their large contact angle (typically 60°) and high-precision matching steel balls, which can simultaneously withstand heavy axial loads and radial loads. With optimized raceway geometry and cage, they achieve extremely low friction and high rigidity, ensuring that they maintain nanometer-level rotational accuracy and excellent axial positioning capability during high-speed operation.
Share this product to:
Let more people see your product
