M5CT36120Y 36120260mm Thrust Bearing Stack

🔍

M5CT36120Y

Bore Diameter:36 mm

Outside Diameter:120 mm

Width:260 mm

Weight:0.76 kg

Reference FOB Price:US1.00 ~ 1000 / Piece

Min. Order:1 Piece

The M5CT36120Y bearing is a Tandem bearings with an inner diameter of 36 mm , an outer diameter of 120 mm, a width of 260 mm. It typically uses P6 P0 P4 P5 grade precision tolerances and features a GCr15 cage, GCr15 rings. It primarily bears Axial, Its dynamic radial rated load is approximately 1300, its static radial rated load is approximately 2000. It uses C0 standard radial clearance, no seals type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Feature: roller

Application: Twin screw extruder gearbox

Dimensions:

Inside Diameter:

36 mm

Outside Diameter:

120 mm

Thickness:

260 mm

Weight:

0.76 KG

Performance Data:

Dynamic load Capacity, Radial (Cr):

1300

Static load Capacity, Radial (Cor):

2000

Reference speed (Grease rpm):

10000

Limiting speed (Oil rpm):

10000

Specifications:

Old Designations:

M5CT36120Y

HS Code:

84825000.90

Structure:

Cylindrical

Number of Rows:

multi-row

Demensions:

36*120*260mm

Brand:

MONTON

Radial Clearance Trade No.:

Precision Rating:

P6 P0 P4 P5

Vibration:

Z1V1

Load Direction:

Axial

Bearing Material:

GCr15

Cage Type:

brass

Cage material:

GCr15

Seals Type:

no seals

Number of Roller:

Roller Material:

GCr15

Contact Angle:

90°

Gear Options:

no gear

Transaction Information:

Transport Package:

Carton/wooden case

Service:

Good

Shipping Ways:

ocean,sea

Country of Origin:

Luoyang

Quality Control:

Third party/Self-control

Stock:

100 Piece

Production Capacity:

1000PCS/WEEK

Port:

Shanghai

Payment term:

T/T

Delivery time:

Stock

Detailed description

M5CT36120Y 36*120*260mm Thrust Bearing Stack

Designations	Principal dimensions			Basic load ratings		Weight

	d	D	H	dyc_Cr	stc_Cor

	mm			KN		kg
M5CT36120Y	36	120	260	1042	4375	14.15

Tandem Thrust bearings are also known as “Multi-Stage cylindrical roller thrust bearings” .

Tandem Thrust bearings are comprised of "stages" which include precision ground and matched thrust plates. These bearings also include compression sleeves separated by cylindrical roller assemblies. This design enables the Tandem Thrust bearings to provide a solution in a radial restricted envelope. The bearings are available in multiple stages, 2-8 to accommodate your design requirements. Depending on your preference, these bearings are available in a wide variety of sizes and options.

TandemThrust Bearings can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictional power. In addition, these bearings are moved by oil lubrication. Also thesetandem thrust bearings are used principally in gear boxes for single & twin screw extruders in the rubber and plastic industries.

1.Multi-stage cylindrical roller thrust bearing (basic type) adopts elastic spacer to connect the shaft washer,housing washer, roller and cage assembly.

The components of this Thrust Bearings are demountable. The user should assemble or dismount the bearing meticulously according to numeral order we provide.

2. Multi-stage cylindrical roller thrust bearing (shaft type) is made by penetrating an axis through theinner bore of basic type multi-stage cylindrical roller thrust bearing and fastening the bearing to the axis by locking collar. The components of this type of cylindrical roller thrust bearing are inseparable.

3. Multi-stage cylindrical roller thrust bearing (sleeve type) locking collar is made by covering a sleeveto the external of the basic type multi-stage cylindrical roller thrust bearing.It is also inseparable,and is assembled and disassembled as a whole.

Multi-Stage cylindrical roller thrust bearings(Tandem bearings) has the characteristics of limited radial space, high axial forces, equal support of all the rows of rollers and long operating life, and is the ideal spindle of parallel screw extruder.

The tandem bearings provided by our institute has the following types: double rows, three rows, four rows, five rows, six rows and eight rows, we also provided bearings with shaft and sleeve barrel. Customers can have their own selections according to center distance of screws, space and load (Figure 1~3). We also accept the orders of other dimensions.

Application of tandem bearings

When using tandem bearings, the following recommendations should be adhered to:

1. Preload: 1% of the dynamic basic load rating. The dynamic basic load rating of each tandem bearing see Figure 1~3. Figures not listed will be provided by out institute on request.

2. Radial guidance: full complement cylindrical roller bearings or needle roller bearings can be used.

3. Eliminate tilting: the supporting parts must be machined to eliminate any tilting.

4. Mounting tolerances: recommended the following mounting tolerances: shaft f6 and housing bore F7.

5. Lubrication: tandem bearings must always be lubricated by oil circulation (Figure 4)

1.Multi-stage cylindrical roller thrust bearing (basic type) adopts elastic spacer to connect the shaftwasher,housing washer, roller and cage assembly.

The components of this Thrust Bearings are demountable. The user should assemble or dismountthe bearing meticulously according to numeral order we provide.

2. Multi-stage cylindrical roller thrust bearing (shaft type) is made by penetrating an axis through theinner bore of basic type multi-stage cylindrical roller thrust bearing and fastening the bearing to theaxis by locking collar.The components of this type of cylindrical roller thrust bearing are inseparable.

Shaft type:This type is another structure derived from the basic type. A shaft is put through the bore of the basic type. The bearing is fixed onto the shaft by some elastic snap ring. This type is not separable and must be mounted as a whole.

The following points must be observed when using tandem thrust bearings.

(1)Preload: 1% of rated dynamic load should be put on the bearings first.please refer to the following Fig1~3 for the rated dynamic load for each type.For those not listed in the figs, please contact technical service .

(2)Radial guidance:Full complement cylindrical roller bearings or needle roller bearings can be used.

(3)Slop avoiding:The supporting parts must be machined to avoid any slop.

(4)Mounting tolerance:For proper using of tandem thrust bearings,we recommend the following mounting tolerance:shaft f6 and bore F7.

(5)Lubricant:Tandem thrust bearings must be lubricated by rare oil regularly.

(6)Mounting:When mounting or dismantling the bearings, it is prohibited to use hammer or other heavy tools to knock on the bearing parts.

(7)Application examples:

As the tandem thrust bearings have the characteristics of limiting radial cross section, excellent axial loading capacity, long working life and low friction loss, they have been successfully used in the reduction gearbox for the parallel twin screw extruder in the plastic and rubber industry. Tandem thrust bearings are highly recommended to be used in other machines and equipment.

The locking collar is made by covering a sleeve to the external of the basic type multi-stage cylindrical roller thrust bearing. It is also inseparable, and is assembled and disassembled as a whole. So it is convenient to mount the bearing to the housing when it is used.

Applications:

a.Twin screw extruder

b.Pipe laying machines

c.Deep hole drilling

d.Oil pressing machine

Please feel free contact with for more technical support!

Share this product to:

Let more people see your product

How can you buy M5CT36120Y 36*120*260mm Thrust Bearing Stack on the Internet?
High quality M5CT36120Y ( 0.76 kg Mass, ID: 36 mm OD: 120 mm WD: 260 mm , multi-row Rows , C0 Radial Clearance , P6 P0 P4 P5 Accuracy Class , GCr15 Material , 1300 Radial dynamic , 2000 Radial static ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. M5CT36120Y. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- F-50952.T3AR Multi-Stage cylindrical roller thrust bearings
- Tandem Thrust bearings are comprised of "stages" which include precision ground and
- F-212505.T4AR Multi-Stage cylindrical roller thrust bearings
- Tandem Thrust bearings are comprised of "stages" which include precision ground and
- F-205274.T8AR Multi-Stage cylindrical roller thrust bearings
- Tandem Thrust bearings are comprised of "stages" which include precision ground and
- T4AR645E 6*45*92mm Multi-Stage cylindrical roller thrust bearings
- TandemThrust Bearings can receive heavy load in a limited space and support
- Mud Stack Thrust Angular Contact Mud Motor Bearings , Dual Ball Bearing 128916M
- The bearings in a mud motor at the end of a drill
- 128718M TC bearing Tungsten Carbide Radial Bearings
- Whether you’re drilling for oil or gas, the bearings in a mud
- 128713K Full Complement Monton Mud Motor Bearings For Drill Motor With Codes
- Special steel for all bearing components • Full complement bearing • Precision matched
- mud motor bearings ,mud lubricated thrust bearings 128723M
- Whether you’re drilling for oil or gas, the bearings in a mud

M5CT36120Y 36120260mm Thrust Bearing Stack

M5CT36120Y Related Products »

Product Groups

Information

Category