KC200CP0 Radial Contact Ball Bearing (type C), Solid Brass Cage
The KC200CP0 Thin-section deep-groove ball bearings are primarily used in applications where space is limited, weight reduction is required, and loads are moderate. Typical applications include industrial robots (such as joints and end-effectors), semiconductor manufacturing equipment, medical imaging equipment (CT scanner gantries), optical trackers, radar antennas, packaging machinery spindles, and lightweight aerospace transmission mechanisms. They are capable of supporting both radial and bidirectional axial loads.
The KC200CP0 bearing is a Thin-section bearings with an inner diameter of 20 inch , an outer diameter of 20.75 inch, a width of 0.375 inch. It typically uses Precision Class 1 per ABEC 1F grade precision tolerances and AISI 52100 steel rings, AISI 52100 steel rolling mlement. Its dynamic radial rated load is approximately 11601.7 N, its static radial rated load is approximately 43546 N. open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Interchange code: KAYDON KDN.KC200CP0, SILVERTHIN SC200CP0, SKF FPCC2000, FAG L10SA2000, NSK NBC50809, INA CSCC200, SSB RC200CP0, NTN KRC200
KC200CP0 bearings ( 20 inch x 20.75 inch x 0.375 inch) have the advantages of Extremely compact, lightweight design, composite load-bearing capacity, high rigidity, and flexible installation, and are therefore widely used in the Robots, semiconductor equipment, medical instruments, radar antennas, and aerospace precision mechanisms.
| Part Number | KC200CP0 |
| Series | KC Series |
| Precision ABEC | Precision Class 1 per ABEC 1F |
| Thin section bearings type | Standard Open REALI-SLIM Inch Series Bearing |
| Ring | AISI 52100 steel |
| Reference From | Kaydon KC200CP0 |
| Manufacturer Part Code | KC200CP0 |
| Seal type | open |
| Rolling bearing type | Radial contact ball bearing (type C) |
| Coating | No |
| Cage | Solid brass |
| Lubricant | No |
| Unit of measurement | inch |
| Separator | P = One-piece, snap-type, stamped brass or non-metallic composite cage |
| Contact type | 2-point contact |
| Races/Balls Material | K = AISI 52100 steel rings and balls, no seals (open) |
| Weight [lb] | 2.16 |
| Balls | Snapover separator 3/16" balls |
| Temperature - T(min) [°C] | -30 |
| Temperature - T(max) [°C] | +110 |
| Shaft diameter [inch] | 20 |
| F chamfer [inch] | 0.040 |
| H Radial cross section [inch] | 0.375 |
| Radial Thickness x Width ["] | C = 0.375 x 0.375 |
| d φ Inside [inch] | 20 |
| D Φ Outside [inch] | 20.75 |
| B Width [inch] | 0.375 |
| L1 Land Dia. [inch] | 20.277 |
| L2 Land Dia. [inch] | 20.473 |
| Cr Dynamic Radial [lbf] | 2596 |
| C0r Static Radial [lbf] | 9764 |
The KC200CP0 Thin-section deep groove ball bearings mainly consist of a thin-walled inner ring, a thin-walled outer ring, steel balls, and a cage. Their cross-sectional dimensions are constant and extremely thin, typically conforming to ISO 12240 standards, and are available in open or sealed configurations.
Thin-section deep groove ball bearings utilize a thin-walled constant cross-section design, resulting in lightweight construction and a small footprint, significantly reducing the overall weight and size of equipment. They can simultaneously withstand radial and bidirectional axial loads, exhibiting low friction and high-speed characteristics, and are easy to install, making them suitable for light to medium load conditions.
Share this product to:
Let more people see your product
