Industry Deep Groove Ball Bearing 6014 6014-2rs Single Row
The 6014-2rs 6014 bearing is a Ball Bearings with an inner diameter of 70 mm , an outer diameter of 110 mm, a width of 20 mm. 2rs type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
The seals way of the bearing:
RS: Contact seal on one side of the bearing
2RS: Coontact seals on both sides of the bearing
Z: Shield on one side of the bearing
ZZ(2Z): Shields on both sides of the bearing.
1)The single row deep groove ball bearing are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.
2)Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.
3)Deep-groove bearings have higher load ratings for their size than shallow-groove, but are also less tolerant of misalignment of the inner and outer races.
4)A misaligned shallow-groove bearing may support a larger load than the same sized deep-groove bearing with similar misalignment.
5)This kind of bearing are aslo avaible both in open design and sealed design
Share this product to:
Let more people see your product
-
- 6000 Deep Groove Ball Bearing
- Single Row Deep Groove Ball Bearing Go Back | Show
-
- 6001-ZZ Deep Groove Ball Bearing
- 6001 Deep Groove Ball Bearing 1)The single row deep groove ball bearing
-
- 6002-ZZ Deep Groove Ball Bearing
- 6002 Deep Groove Ball Bearing The single row deep groove ball bearing
-
- 6003 Deep Groove Ball Bearing
- 6003 Deep Groove Ball Bearing The single row deep groove ball bearing