HM926740.710D Bore 114.3 Mm, Tapered Roller Bearings, Double Row, Inch Dimensions
The HM926740.710D Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The HM926740.710D bearing is a Tapered Roller Bearings, double row, in inch dimensions O-arrangement with an inner diameter of 114.3 mm , an outer diameter of 228.6 mm, a width of 115.888 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, its static radial rated load is approximately 1180000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
HM926740.710D bearings ( 114.3 mm x 228.6 mm x 115.888 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | HM926740.710D |
| Interchangeable | TIMKEN HM926740.710D |
| Desgin Figure | 1 |
| Cage | Stamping steel cage |
| Arrangement | back-to-back (<>) |
| Seal | Open |
| Bearing Type | Tapered Roller Bearings, double row, in inch dimensions O-arrangement |
| Design type | TDO |
| Bearing Weight [lb] | 48.501 |
| d φ Inside [inch] | 4.500 |
| D Φ Outside [inch] | 9.000 |
| T Cone [inch] | 4.563 |
| C Cup [inch] | 3.313 |
| rs min Chamfer Cup | 2.3 mm |
| r1s min Chamfer Cone | 3.6 mm |
| C0r Radial Static [lbf] | 265264 |
| Cr Radial Dynamic ISO 281 [lbf] | 156236 |
| Cr90 Equivalent load rating [lbf] | 46758 |
| Ca90 Equivalent load rating [lbf] | 32146 |
| Factor | |
| e | 0.7 |
| K Thrust factor | 0.83 |
Share this product to:
Let more people see your product
