SuZhou TMP Machinery Parts Co.,Ltd
Free Member
FSO900 One Way Clutches Sprag Type (161.92x304.8x158.75mm) bearing supported Freewheel Clutch

FSO900 One Way Clutches Sprag Type (161.92x304.8x158.75mm) Bearing Supported Freewheel Clutch

Min. Order:
1 Piece
Payment term:
T/T
Delivery time:
3 Days After Payment
Technical Parameters:
Product Designations:
FSO900
Structure:
One Way Bearings
Inside Diameter:
161.92 mm
Outside Diameter:
304.8 mm
Thickness:
158.75 mm
Weight:
1 KG
Brand:
TMP
Precision Rating:
P0
Bearing Material:
Gcr15 bearing steel
Seals Type:
Open
FSO900 One Way Clutches Sprag Type (161.92x304.8x158.75mm) Bearing Supported Freewheel Clutch

FSO900 One Way Clutches Sprag Type (161.92x304.8x158.75mm)

 One Way Bearings Stieber bearing supported Freewheel Clutch  

 A . One Way Clutches Sprag Type Parameters
Brand- TMP
Model number- FSO900
Inner ring(mm)- 161.92
Outer ring(mm)- 304.8
Width(mm)- 158.75
Weight(Kg)-  
Drag torque(Nm)- 24408
Materials- GCR15
Series- FSO
Lubrication type- Grease/oil
Clutch type- Sprag
Precision-  P0
Structure- Types FSO are sprag type freewheels self-contained, sealed and bearing supported, using two ball bearings.
 
 B . FSO900 One Way Clutches Sprag Type Specification Sheet
Model
Number
Torque
Drag(Nm)
Overrunning
speeds(r/min)
Diameter(mm) G
Inner
Race
Outer
Race
A B C D E S H Num Holes Depth
FSO900 24408 700 500 158.75 304.8 161.9  161.92 247.65 34.92 1.58×45° 10 M16 31.75
 C . FSO Series One Way Clutches Sprag Type Details

Product 

Features

One Way Clutches Sprag Type mainly used as Backstop clutches(Most suitable as 

backstops, and mostly the contact-free versions);
Backstop clutches:The freewheel allows rotation in one direction only. It overruns

 continuously during operation. The freewheel prevents reverse rotation if the drive is 

disconnected.

Series 

Introduction

Types FS, FSO, and HPI 300 to 1027 are sprag type freewheels self-contained, sealed 

and bearing supported, using two ball bearings.Units are delivered oil or grease lubricated

 accordingto the type. It is a Formsprag USA design that uses tall sprags with multi-

radius active surfaces. Designed specially for large size freewheels to compensate for 

any eccentricity due to bearing wear. Types FS and HPI are oil lubricated and use 

standard shaft lip seals. Type FSO isgrease lubricated and equipped with special grease seals.
Type HPI is specially designed for high speed indexing applications. Each of the different

 models show a range of standard metric bore diameters. We can supply any bore size 

between the minimum and maximum specified in the table, including imperial sizes.

Series 

Model No.

FSO300 FSO400 FSO500 FSO600 FSO700 FSO750 FSO800 FSO900 FSO1027
Applications Reducers , Flender Gearbox ,SEW Gearbox;
Overrunning clutch:for multiple-machine drives or to separate the inertia of masses of a driven machine from the driving
machine after it has been switched off.

Indexing clutch:which turns a shaft step by step, thus achieving indexed material feed or a variable speed.

Backstop clutch:to prevent a machine shaft turning backwards. In this case the overrunning clutch acts as a brake.

Share this product to:     Let more people see your product
How can you buy FSO900 One Way Clutches Sprag Type (161.92x304.8x158.75mm) Bearing Supported Freewheel Clutch on the Internet?
High quality FSO900 ( 1 kg Mass, ID: 161.92 mm OD: 304.8 mm WD: 158.75 mm , P0 Accuracy Class , Gcr15 bearing steel Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. FSO900. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.
FSO900 Related Products »