Product Overview
The F-695755.TR1 is a single-row tapered roller bearing with boundary dimensions 65 mm bore × 90 mm outside diameter × 13.5/17.5 mm stepped width. It is catalogued as an automotive gearbox / differential bearing and is manufactured to FAG / Schaeffler TR1-series specification, featuring a stamped steel cage and an open (unsealed) configuration for lubrication by the transmission or differential oil circuit.
Key Specifications
| Parameter | Value |
|---|---|
| Model | F-695755.TR1 |
| Type | Single-row tapered roller bearing |
| Bore (d) | 65 mm |
| Outside diameter (D) | 90 mm |
| Width (B/T) | 13.5 / 17.5 mm(stepped width) |
| Weight | Consult supplier(not published for this specific designation) |
| Cage | Stamped steel cage(FAG TR1-series standard) |
| Seals | Open / no seals |
| Rolling element material | GCr15 chrome steel |
| Load direction | Radial and axial(combined) |
| HS Code | 8482500090(tapered roller bearings) |
| Application | Automotive gearbox / differential bearing |
Performance Features
-
Single-row tapered roller geometry:Conical raceways support combined radial and axial loads simultaneously, with axial capacity in one direction. The tapered design provides the stiffness required for gear-mesh loads in gearbox and differential service.
-
Stepped 13.5/17.5 mm width:The asymmetric width provides defined axial location within the transmission or differential housing, simplifying bearing setting and shaft end-play adjustment during assembly.
-
Stamped steel cage:The pressed steel cage retains and guides the tapered rollers under the cyclic loading of drivetrain operation, consistent with the FAG TR1-series standard configuration.
-
Open configuration for oil-circuit lubrication:No integral seals,the bearing relies on the transmission or differential oil for lubrication and cooling, consistent with the wet-sump strategy of these assemblies.
Application
The F-695755.TR1 is used as an automotive gearbox / differential bearing. In service, it supports a gear shaft or differential component under the combined radial and axial loads generated by the gear train. The 65 × 90 × 13.5/17.5 mm envelope and the open, oil-lubricated configuration are consistent with a direct-fit drivetrain service bearing. Replacement requires transmission or differential disassembly and should follow the vehicle manufacturer's procedure for shaft end-play and bearing preload adjustment.
| Company | WUXI MUFA TECHNOLOGY CO.,LTD. |
| Sales | Alice Wong |
| [email protected] | |
| +86 13771165326 | |
| mufatec-bearings |















