Double Row Cylindrical Roller Bearing With Ribs JC6
The JC6 bearing is a Roller bearing with an inner diameter of 110 mm , an outer diameter of 220 mm, a width of 180 mm. It typically uses P0/P5 grade precision tolerances and Rubber seal type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Technical parameters:
|
Bearing Number |
Fig No |
Boundary dimension(mm) |
Basic load ratings |
Mass |
|||||
|
|
|
d |
D |
B |
F |
c |
N(Cr) |
N(Cor) |
kg |
|
JC6 |
1 |
110 |
220 |
180 |
138 |
1 |
790000 |
1190000 |
29.8 |
|
2RNUP2459 |
1 |
120 |
240 |
185 |
150 |
4 |
945000 |
1470000 |
40 |
|
JC12 |
3 |
120 |
240 |
180 |
150 |
1 |
1020000 |
1580000 |
40 |
|
JC34 |
4 |
120 |
230 |
170 |
145 |
1 |
945000 |
1460000 |
30.8 |
|
JC35 |
4 |
120 |
225 |
170 |
145 |
1 |
875000 |
1380000 |
30 |
|
JC38 |
4 |
125 |
235 |
170 |
150 |
1 |
945000 |
1470000 |
32.1 |
|
JC14 |
2 |
130 |
260 |
160 |
163 |
4 |
1080000 |
1710000 |
40.2 |
|
JC16 |
1 |
130 |
280 |
210 |
167 |
1 |
1440000 |
2250000 |
62.3 |
|
JC21 |
5 |
130 |
260 |
205.5 |
163 |
|
1030000 |
1610000 |
45.3 |
|
JC37 |
4 |
130 |
265 |
166 |
161.5 |
1 |
1140000 |
1700000 |
43.4 |
Product features:
Double row cylindrical roller bearing with ribs JC6 is usually guided by the two ribs of one bearing ring. Cage, roller and guiding ring form an assembly. This bearing is usually separable bearing. The installation and disassembly of this kind of bearing is convenient. Especially when the inner and outer rings as well as the shaft and housing are required to have interference fit, its advantage is more obvious. This kind of bearing is usually only used to bear radial load. Only the single row bearing, of which the inner and outer rings both have ribs, can bear smaller axial load or larger intermittent axial load. Compared with deep groove ball bearing of the same shape and size, this bearing has larger radial load ability. As for the structure, this bearing is also applicable to high speed rotation.
The roller and ball track of E&K cylindrical roller bearing are designed with convexity modification, which can eliminate the edge stress and improve the service life of bearing.
The ribs of E&K cylindrical roller bearing are designed with inclination angle, which makes it able to bear larger axial load than that of the regular design.
Share this product to:
Let more people see your product
-
- Double row cylindrical roller bearing JC1
- This type of bearing JC1 is separable. As their roller linearly come
-
- Double row cylindrical roller bearing JC2
- This type of bearing JC2 is separable. As their roller linearly come
-
- Double row cylindrical roller bearing JC11
- This type of bearing JC11 is separable. As their roller linearly come
-
- Double row cylindrical roller bearing JC9
- This type of bearing JC9 is separable. As their roller linearly come
-
- RKS.061.20.0414 bearing
- BearingRKS.061.20.0414Single row four point contact ball slewing bearing two seat, compact structure,
-
- RKS.061.20.0544 bearing
- BearingRKS.061.20.0544.Single row four point contact ball slewing bearing two seat, compact structure,
-
- VLA200414 bearing
- Mainly be used in slewing conveyors, welding arms and manipulators, small and
-
- VLA200544 bearing
- Mainly be used in slewing conveyors, welding arms and manipulators, small and