 |
Deep Groove Ball Bearing 6001 6001zz 6001rs
Deep Groove Ball Bearing 6001 6001zz 6001rs
Radial ball bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads in either direction. They are available with metal shields (ZZ) or rubber seals (2RS). Several tolerance grades (Abec 1-9), internal clearance (C2 to C4) and cage designs are available to best suit the running precision and speed of the application.
Common Options:
- ZZ-- Two Metal Shields
- 2RS-- Two Rubber Seals
- NR-- Snap Ring
- M-- Brass Cage
- C0-- Normal Internal Clearance
- C3-- Greater than normal
Product Description:
Deep Groove Ball Bearing 6001 6001zz 6001rs
Product Overview
The 12x28x8 Metal bearings 6001ZZ are a high quality steel/chrome bearing with metal shields. These bearings have been tested and proven by many racers. Check your manual for the correct size for you vehicle if you are not certain
Bearing Dimensions
- METRIC: 12mm (Inner) x 28mm (Outer) x 8mm (Width)
- STANDARD: 0.47244" (Inner) x 1.10236" (Outer) x 0.31496" (Width)
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Bearing Data - General
RSH or RS = Sheet steel reinforced contact seal of acrylonitrile-butadiene rubber (NBR) on one side of the bearing
2RSH or 2RS = RSH or RS contact seal on both sides of the bearing
RSL = Sheet steel reinforced low-friction contact seal of acrylonitrile-butadiene rubber (NBR) on one side of the bearing
2RSL = RSL low friction contact seal on both sides of the bearing
Z = Shield of pressed sheet steel on one side of the bearing
2Z or ZZ = Z-Shield on both sides of the bearing
Principal Dimensions
- Item: 6001 Bearing
- Type: Single row deep groove ball bearings
- Inner Ring Diameter (bore): 12mm
- Inner Ring Tolerance: 0~-10µm
- Outer Ring Diameter: 28mm
- Outer Ring Tolerance: 0~-11µm
- Width: 8mm
- Clearance: 0~10µm
- Basic Dynamic Load Rating Cr: 5.4 kN
- Basic Static Load Rating Cor: 2.36 kN
Share this product to:
Let more people see your product
-
- 6000-2RS 6000-ZZ Radial Ball Bearing 10X26X8mm Sealed or Shielded
- We produce 6000 deep groove ball bearings. Welcome your inquiry and contact,
-
- Deep Groove Ball Bearing 6001 6001zz 6001rs
- We produce 6001 deep groove ball bearings. Welcome your inquiry and contact,
-
- 6003-2Z/C3 - 35OD 17ID Shield Bearing Wholesale Price
- We produce 6003 deep groove ball bearings. Welcome your inquiry and contact,
-
- 6004zz Carbon Steel Low Noise Deep Groove Ball Bearing
- We produce 6004 deep groove ball bearings. Welcome your inquiry and contact,
