 |
BK 1010 Needle Roller Bearing
Min. Order:
1 Piece
Payment term:
T/T,L/C
Delivery time:
Within 3 days after recieve payment
Technical Parameters:
Product Designations:
BK 1010
Structure:
Needle Roller Bearing BK 1010
Inside Diameter:
10 mm
Outside Diameter:
14 mm
Thickness:
10 mm
Weight:
0.0044 KG
Brand:
FAG
Precision Rating:
P2
Bearing Material:
Chrome steel
Seals Type:
Open
Introduction:
The outer ring of drawn cup needle roller bearing is punched with the steel sheet. It has the small sectional height and the large load carrying capacity and is suitable for economic mass production.
The interference fit between outer ring and bearing housing is applied to this kind of needle roller bearing without axial fixing device. Even for the condition of high load, it fully maintains bearing function either. In addition, with the large grease-storage capacity, it is unnecessary to add grease for a long-term operation.
Since one end of the close-end bearing is sealed, it is suitable for the end of shaft with bearing the small axial sliding force.
Product Description:
Needle rollers bearing can bear greater radial load and there are ones with inner ring and without inner ring. G2 needle rollers are installed, the tolerance of the average diameter is within 2um. Rigidity holders are adopted to correctly lead the needle rollers to be parallel with the axes.
Classification:
Metric and inch drawn-cup caged needle roller bearing
Metric and inch drawn-cup needle roller bearing full roller complement
Heavy-duty needle roller bearing with ribs, without ribs
Drawn-cup needle roller clutches
Thrust needle roller bearings and washers
Features:
1) Drawn cup needle roller bearings with open ends/ closed ends
2) Needle roller and cage assemblies
3) Axial needle roller and cage assemblies / Axial bearing washer / Axial needle roller bearings
4) Drawn cup roller clutches
5) Yoke type track rollers
6) Stud type track rollers8) Axial cylindrical roller bearings / Axial cylindrical roller and cage assemblies / Axial bearing washers
Share this product to:
Let more people see your product
-
- HK 1520 .2RS bearing 15x21x20mm
- Needle bearings are heavily used in automobile components such as rocker arm
-
- HK 1812 Needle Roller Bearing
- Specifications machined needle bearing 1.High speed,low noise 2.Bearing steel 3. High precision
-
- HK3012 Needle Roller Bearing
- Specifications machined needle bearing 1.High speed,low noise 2.Bearing steel 3. High precision
-
- BK 3520 Needle Roller Bearing
- Specifications machined needle bearing 1.High speed,low noise 2.Bearing steel 3. High precision
