- Hello Customer - Log in or Register!
Bearing early retirement will; if too much fat replacement, maintenance techniques for bearing two complex problems is when replacing oil and how much oil should be changed. If you replace the oil too. Bearing will be in trouble or temporary hazards power coil and wire. Lubrication intervals have a simple premise: TIMKEN bearings due to dry and do not stop the disintegration of the device under conditions to maintain a reasonable run. This is a fixed concept of prevention. But hunger and plenty of lubrication must adhere to the balance between excessive lubrication. Lubrication program is based on the time given device vendors typically lubricated according to the operation time to develop plans. TIMKEN bearings and equipment suppliers in the course of regular maintenance program for the amount of oil added guidance.
Short-term replacement of oil is very rare thing. And often added grease ones. As required every two to three weeks to replace oil, every time you add an ounce of grease. These recommendations led to some of his outset no practical significance not know the factors that have built up on the need to replace the oil bearing quality is better now, no matter what the bearings. Use operation, replace the bearing grease is essential although time without replacing the grease no problem, but for a long time without replacing the grease, it would affect the bearing life. To pay attention to the bearing replacement grease, so I use the use of bearings. The oil-bearing abilities for a good functioning properly, so let bearing good caliber run down. So TIMKEN bearings in operation, when to replace grease it?
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 7205BDF NSK | 25 | 52 | 15 |
| 7205ADF NSK | 25 | 52 | 15 |