Date: 2013-08-06

Radial Clearance Explained

Virtually all rolling element bearings are designed with a specific internal clearance. The internal clearance is defined as the total clearance between the rings and the rolling elements. This clearance provides:
 

• Free rotation of rolling element


• Compensation for thermal expansion


• Optimum load distribution

 

ing the correct internal clearance is important because bearings hold the rotating parts of a mechanism in proper position across the entire performance envelope of the application. The amount of internal clearance can influence:
 

• Noise


• Vibration


• Heat build-up


• Fatigue life

 

Vibration, interface fits and temperature will also have some affect on internal clearance. To obtain the optimal internal clearance for a specific application, these parameters must be taken into consideration. In certain applications, the correct choice of clearance for the bearings is critical. Internal clearance can be separated into two categories:
 

• Radial


• Axial

 

 

In ball bearings, as the radial clearance increases, the axial clearance increases as well. The more room between the balls and the rings (radial clearance), the more the elements can shift in relation to each other. Generally, internal clearances are designated from C1 (the tightest) through to C5 (the loosest or largest). The 'normal' clearance is CN, a range sitting between C2 and C3. It is worth noting that if the bearing clearance is not stated in the bearing reference it can be assumed to be normal clearance. With a higher clearance there is more tolerance of thermal expansion effects on the rings and rolling elements. When noise and vibration must be restricted, lower clearances are necessary. Ultimately the specific application and operating conditions determine the appropriate internal clearance. For example, paper-drying machines that operate under hot conditions usually need C3 and C4 clearances. The severe vibration in vibrating screens normally means that C3 and C4 clearances are required. ion of the correct radial internal clearance group is by calculation and you should refer to your bearing manufacturers handbook. Factors to be assessed include:
 

• Expansion of the inner ring due to interference fit on shaft


• Contraction of the outer ring due to interference fit in the housing


• Differential temperature between the inner and outer rings


• Differential expansions due to non-ferrous mountings

 

 

Previous: Bearing Storage and Handling
Next: Bearing material properties chart

Hot Products:

Product Model	Inside Diameter	Outside Diameter	Thickness
7207BDT NSK	35	72	17
7207ADT NSK	35	72	17

【TradeBearings News Statement】

1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"TradeBearings".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.