- Hello Customer - Log in or Register!
bearings require lubrication in order to ensure maximum service life, many users do not know how to lubricate bearings, causing premature bearing damage.
bearings bearing is not easy to bad lubrication is good, so so that bearing life is too short. Here is the relevant knowledge on the bearing area include the following aspects:
1, first of all the various parts of the bearing lubrication, reducing bearing friction and wear;
2, so that the rolling bearing contact surfaces often form an appropriate film to extend bearing fatigue life;
3, through the bearing lubrication can achieve the role of rust and dust.
4, by taking the bearing lubrication of internal friction or other reasons due to the heat generated; mist lubrication applied to a number of mechanical gears, mechanical worm gear, mechanical chain, mechanical slide, linear rail and a variety of domestic and imported bearings bearing surface lubrication.
Lubricating oil mist lubrication and other methods, compared with many unique advantages:
With the compressed air oil mist can be dispersed to import all the necessary lubrication of the friction bearing parts. Get a good and uniform lubrication. Compressed air specific heat is small, high velocity, it is easy to remove import of the heat generated by friction bearings. "
A significant reduction in the consumption of imported bearing lubricants. Than the thin oil circulation lubrication system is simple lightweight, small footprint, power consumption is low, easy maintenance, easy to implement automatic control, the cost is low; due to oil mist has a certain pressure, so you can play the role of a good seal to prevent the outside world impurities, moisture and other invasive bearing friction deputy.
| Product Model | Inside Diameter | Outside Diameter | Thickness |
| 45TAC20X+L NSK | 45 | 75 | 38 |
| 40TAC20X+L NSK | 40 | 68 | 36 |