7952A5TRSULP3 bearings ( 260 mm x 360 mm x 46 mm) have the advantages of High speed, ultra-precision, high rigidity, low operating friction, and long service life, and are therefore widely used in the Machine tool spindles, high-speed motors, ball screws, industrial robots and precision rotating equipment.

| Part Number | 7952A5TRSULP3 |
| Design type | 7 = Standard High-Accuracy |
| Bearing Type | High-Accuracy Angular Contact Ball Bearings, Standard Series |
| Accuracy class | P3 = dimensional tolerances (P4), running accuracy (P2) |
| Cage | TR = Phenolic resin, Outer ring guided |
| Equivalent | 7952A5 TR SUL P3 |
| Arrangement | SU = Single row (Universal) |
| Seal | Open type |
| Dimension series | 9 = 19 Series |
| Weight [kg] | 14.3 |
| Contact angle - α [°] | A5 = 25 |
| Dimension | |
| Inside - d φ [mm] | 260 |
| Outside - D Φ [mm] | 360 |
| Width - B [mm] | 46 |
| Chamfer - r min [mm] | 2.1 |
| Chamfer - r1 min [mm] | 1.1 |
| Effective Load Center - a [mm] | 95.3 |
| Abutment Dimensions | |
| da min [mm] | 272 |
| Da max [mm] | 348 |
| Db max [mm] | 353 |
| Fillet Radius - ra max [mm] | 2 |
| Fillet Radius - rb max [mm] | 1 |
| Performance | |
| Radial Dynamic - Cr [N] | 250657 |
| Radial Static - C0r [N] | 342591 |
| Speed ratings (grease) - nB [min–1] | 2977 |
| Speed ratings (oil) - nG [min–1] | 4574 |
| Permissible Axial Load [N] | 252908 |
| Preload | |
| Preload | L = Light Preload |
| L [N] | 3888 |
| L [N/µm] | 688 |
| L [µm] | -30 |
| Other Arrangement | DU arrangement 2 set: DB(<>): 7952A5TRDBLP3; DF(><): 7952A5TRDFLP3; DT(<<): 7952A5TRDTLP3 DUD arrangement 3 set: DBD(<<>): 7952A5TRDBDLP3; DFD(>><): 7952A5TRDFDLP3; DTD(<<<): 7952A5TRDTDLP3 QU arrangement 4 set: DBB(<<>>): 7952A5TRDBBLP3; DFF(>><<): 7952A5TRDFFLP3; DTT(<<<<): 7952A5TRDTTLP3; DBT(<<<>): 7952A5TRDBTLP3; DFT(>>><): 7952A5TRDFTLP3 |
The 7952A5TRSULP3 Ultra-precision angular contact ball bearings are primarily composed of high-precision bearing steel inner and outer rings, steel balls (ceramic balls or EQTF? ultra-long life steel balls optional), and a cage. Contact angles are available in various specifications including 15°, 18°, 25°, 30°, and 40°. Cages are available in polyamide resin (TYN), phenolic resin (TR), and copper alloy materials.
Ultra-precision angular contact ball bearings utilize Robust series technology, achieving low heat generation and ultra-high speeds through optimized internal dimensional design. Using the independently developed SHX heat-resistant steel material, rolling fatigue life is extended to four times that of SUJ2 material, and high-speed performance is improved by 20%. Employing oil-air lubrication SpinShot II technology, speeds up to 40,000 rpm in the NT#40 class, with noise reduction of 3-5 dB.















