7334 Angular Contact Ball Bearing 170*360*72 MM
The 7334 bearing is a Angular contact ball bearing with an inner diameter of 170 mm , an outer diameter of 360 mm, a width of 72 mm. It typically uses P0 P6 P5 P4 grade precision tolerances and OPEN type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Hub bearings 7334 & 7334 bearings China manufacturer
(Brand) |
JMZC OEM | |
(Series) |
angular contact ball bearings | |
(Bearing NO) |
7334 bearings |
|
(Basic size) :mm |
inner diameter | 170 |
| outer diameter | 360 | |
| thickness | 72 | |
| r(min) | 4 | |
| r1(min) | 1.5 | |
| a | 40.5 | |
(Basic load ratings) :N |
dymamic load rating (Cr) | 390000 |
| static load rating (Cor) | 485000 | |
(Limiting Speeds) :N(1/min) |
grease lubrication | 1600 |
| oil lubrication | 2200 | |
| (Mass) | 35.7 kg | |
|
(Detail) |
single row angular contact ball bearings ,30°angle |
|
Descriptions of 7334 bearings
An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race.
7334 bearings, angular contact ball bearing, is made of Chrome Steel. which have a contact angle so that they can sustain significant axial loads in one direction together with radial loads.
7334 bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle α is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
Advantages of 7334 bearings
1.Low friction, almost noiseless and high rolling speed
2.Easy to install
3.Simple structure ensures fast equipment
4.Optimised internal design
5.High load ratings
6.Increased limiting speed
7.High strength ball guided brass cage
8.High dimensional and running accuracy
9.Narrow axial clearances or preloads range
10.Universal facing in standard
The features of 7334 bearings
7334 bearings is that it can bear both radial load axial load, the axial load capacity depends on how big the contact angle is, the bigger angle, the bigger capacity.
7334 Bearings is mainly applied on high speed, high precision and little axial load occasions, such as airplane engine main shaft, machine tool main shaft and main shafts of other high speed precision machine. It can also be applied on high frequency motor, steam turbine, oil pump, air compressor and printing machine etc. It is one of the bearings most widely used in machinery industry.
|
Principal dimensions |
Basic load ratings |
Mass |
Designations |
|||
|
|
dynamic |
static |
|
|
||
|
|
|
|
||||
|
d |
D |
B |
C |
C0 |
|
|
|
|
||||||
|
mm |
kN |
kg |
- |
|||
|
|
||||||
|
180 |
250 |
33 |
168 |
212 |
4,2 |
71936 CD/P4A |
|
180 |
280 |
46 |
229 |
275 |
8,9 |
7036 ACD/P4A |
|
180 |
280 |
46 |
242 |
290 |
8,9 |
7036 CD/P4A |
|
190 |
260 | |||||
