7218BECBM 90*160*30mm Machine Tool Spindles Angular Contact Ball Bearing
The 7218BECBM bearing is a Angular Contact Ball Bearing with an inner diameter of 90 mm , an outer diameter of 160 mm, a width of 30 mm. It typically uses P4 grade precision tolerances and features a GCr15 cage, GCr15 balls, It primarily bears Radial/Axial, Its dynamic radial rated load is approximately 1300, its static radial rated load is approximately 2000. It uses C0 standard radial clearance, no seals type, GCr15. together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Feature: balls
Application: Air compressor
| Designations | Basicdesign bearing |
Principal dimensions | Basic load ratings | Fatigue load limit |
Speed ratings | Mass | ||||
| Universally matchable bearing |
d | D | B | dynamic | static | Pu | Reference speed |
Limiting speed |
||
| mm | mm | mm | C kN | Co kN | kN | r/min | r/min | Kg | ||
| 7218BECBM | – | 90 | 160 | 30 | 116 | 104 | 4 | 5 000 | 5 000 | 2,3 |
| 7218BECBP | – | 90 | 160 | 30 | 116 | 104 | 4 | 5 000 | 5 000 | 2,3 |
| 7218BECBY | 7218BEP | 90 | 160 | 30 | 108 | 96,5 | 3,65 | 4 500 | 4 500 | 2,3 |
Single row angular contact ball bearings can not only withstand radial load and axial load in one direction, but also accommodate only axial load in single direction, radial loads produce axial forces in these bearings that need to be balanced by counter forces.Therefore, the single row angular contact ball bearings often need to be installed with other bearings which withstand axial load in the opposite direction. In other words, the angular contact ball bearings are commonly used in pair, or in groups with three, four and even five bearings. Angular contact ball bearings have higher limiting speed.
The MONTON precision angular contact ball bearings for spindle, have four size series, 718,719,70 and 72. With the same inner diameter, but the outer diameter and the width of 718,719,70 and 72 series increase in turn.
MONTON precision angular contact ball bearings with 15° (C) and 25° (AC) contact angles. As for the angular contact ball bearings, the bigger the contact angle is, the greater the axial load capacity is, but the lower the limiting speed of bearings becomes. Therefore, the spindle, with high speed and small axial load, should adopt the 15° angular contact ball bearings, whereas the 25° angular contact ball bearings should be adopted.
MONTON precision angular contact ball bearings with high-speed angular contact bearings (standard series), super high-speed angular contact ball bearings, high-speed sealed angular contact ball bearings and high-speed spindle bearings.
The inner ring, outer ring and rolling element of rolling bearing under normal operating conditions are made of high carbon chromium bearing steel, but the steel bearings cannot meet the requirements of such special conditions as high speed, wear-resisting, low temperature rising, long life and high reliability etc., then Si3N4 ceramics are believed to be present optimum rolling bearing materials to replace bearing steel.
MONTON also offers widely used hybrid angular contact ball bearings for spindles in high-speed precision machine tools and other high-speed precision machines, that is, the inner and outer rings are made of high-quality bearing steel materials, while the rolling element is made of Si3N4 ceramics.
Compared to the angular contact ball bearings made of steel, hybrid angular contact ball bearings with the same structure and size have high speed, high stiffness, low friction heat, and long life etc.
MONTON precision hybrid bearings with ceramic ball (HQ1) can significantly improve the speed, rigidity, reliability, and productivity of machine tools, and greatly reduce the friction heat, then extend the service life of host machine etc.
Share this product to:
Let more people see your product
-
- ZKLF1255-2RS 12*55*25mm angular contact ball bearings
- Screw drive bearing arrangements are subjected to requirements that often cannot be optimally
-
- ZKLF1560-2RS 15*60*25mm angular contact ball bearings
- Screw drive bearing arrangements are subjected to requirements that often cannot be optimally
-
- ZKLF1762-2RS 17*62*25mm angular contact ball bearings
- Screw drive bearing arrangements are subjected to requirements that often cannot be optimally
-
- ZKLF2068-2RS 20*68*28mm angular contact ball bearings
- Screw drive bearing arrangements are subjected to requirements that often cannot be optimally
-
- Mud Stack Thrust Angular Contact Mud Motor Bearings , Dual Ball Bearing 128916M
- The bearings in a mud motor at the end of a drill
-
- 128718M TC bearing Tungsten Carbide Radial Bearings
- Whether you’re drilling for oil or gas, the bearings in a mud
-
- 128713K Full Complement Monton Mud Motor Bearings For Drill Motor With Codes
- Special steel for all bearing components • Full complement bearing • Precision matched
-
- mud motor bearings ,mud lubricated thrust bearings 128723M
- Whether you’re drilling for oil or gas, the bearings in a mud