7032CTRSUELP4 bearings ( 160 mm x 240 mm x 38 mm) have the advantages of High speed, ultra-precision, high rigidity, low operating friction, and long service life, and are therefore widely used in the Machine tool spindles, high-speed motors, ball screws, industrial robots and precision rotating equipment.

| Part Number | 7032CTRSUELP4 |
| Design type | 7 = Standard High-Accuracy |
| Bearing Type | High-Accuracy Angular Contact Ball Bearings, Standard Series |
| Accuracy class | P4 = (ABEC-7 / ISO Class 4) |
| Cage | TR = Phenolic resin, Outer ring guided |
| Equivalent | 7032C TR SUEL P4 |
| Arrangement | SU = Single row (Universal) |
| Seal | Open type |
| Dimension series | 0 = 10 Series |
| Weight [kg] | 5.11 |
| Contact angle - α [°] | C = 15 |
| Dimension | |
| Inside - d φ [mm] | 160 |
| Outside - D Φ [mm] | 240 |
| Width - B [mm] | 38 |
| Chamfer - r min [mm] | 2.1 |
| Chamfer - r1 min [mm] | 1.1 |
| Effective Load Center - a [mm] | 45.8 |
| Abutment Dimensions | |
| da min [mm] | 172 |
| Da max [mm] | 228 |
| Db max [mm] | 233 |
| Fillet Radius - ra max [mm] | 2 |
| Fillet Radius - rb max [mm] | 1 |
| Performance | |
| Radial Dynamic - Cr [N] | 176806 |
| Radial Static - C0r [N] | 189394 |
| Speed ratings (grease) - nB [min–1] | 5278 |
| Speed ratings (oil) - nG [min–1] | 8242 |
| Permissible Axial Load [N] | 113512 |
| Factor - fo | 16.0 |
| Preload | |
| Preload | EL = Extra Light Preload |
| EL [N] | 623 |
| Axial Rigidity [N/µm] | |
| EL [N/µm] | 147 |
| Measured Axial Clearance [µm] | |
| EL [µm] | -14 |
| Other Arrangement | DU arrangement 2 set: DB(<>): 7032CTRDBELP4; DF(><): 7032CTRDFELP4; DT(<<): 7032CTRDTELP4 DUD arrangement 3 set: DBD(<<>): 7032CTRDBDELP4; DFD(>><): 7032CTRDFDELP4; DTD(<<<): 7032CTRDTDELP4 QU arrangement 4 set: DBB(<<>>): 7032CTRDBBELP4; DFF(>><<): 7032CTRDFFELP4; DTT(<<<<): 7032CTRDTTELP4; DBT(<<<>): 7032CTRDBTELP4; DFT(>>><): 7032CTRDFTELP4 |
The 7032CTRSUELP4 Ultra-precision angular contact ball bearings are primarily composed of high-precision bearing steel inner and outer rings, steel balls (ceramic balls or EQTF? ultra-long life steel balls optional), and a cage. Contact angles are available in various specifications including 15°, 18°, 25°, 30°, and 40°. Cages are available in polyamide resin (TYN), phenolic resin (TR), and copper alloy materials.
Ultra-precision angular contact ball bearings utilize Robust series technology, achieving low heat generation and ultra-high speeds through optimized internal dimensional design. Using the independently developed SHX heat-resistant steel material, rolling fatigue life is extended to four times that of SUJ2 material, and high-speed performance is improved by 20%. Employing oil-air lubrication SpinShot II technology, speeds up to 40,000 rpm in the NT#40 class, with noise reduction of 3-5 dB.















