7019 CBGB/P4A Super-precision Angular Contact Ball Bearings, 15° Contact Angle, High-speed B Design
The 7019 CBGB/P4A Ultra-precision angular contact ball bearings are widely used in conventional high-speed precision machining applications, such as machining center spindles, milling machine spindles, grinding machine spindles, lathe spindles, woodworking machinery, and ball screw support mechanisms.
The 7019 CBGB/P4A bearing is a super-precision angular contact ball bearings with an inner diameter of 95 mm , an outer diameter of 145 mm, a width of 24 mm. It typically uses P4A grade precision tolerances and Carbon chromium steel rings, GCr15SiMn rolling mlement. Its dynamic radial rated load is approximately 29407 N, its static radial rated load is approximately 25824 N. open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
7019 CBGB/P4A bearings ( 95 mm x 145 mm x 24 mm) have the advantages of High speed, ultra-precision, high rigidity, low operating friction, and long service life, and are therefore widely used in the Machine tool spindles, high-speed motors, ball screws, industrial robots and precision rotating equipment.
| Part Number | 7019 CBGB/P4A |
| Bearing Type | super-precision angular contact ball bearings |
| Internal design | CB = 15° contact angle, high-speed B design |
| Series | 70..-CBGB/P4A |
| Weight [kg] | 1.3 |
| Units | Metric |
| Contact type | 2-point contact |
| Accuracy class | P4A |
| Rows NO. | 1 |
| Cage | Cotton fabric reinforced phenolic resin or carbon fibre reinforced PEEK, outer ring centred |
| Dimension series | ISO dimension series 10 |
| Contact angle - α | 15 ° |
| Manufacturer Part Code | 7019CBGB/P4A |
| Bore Type | Z = Cylindrical Bore |
| Ring material | Carbon chromium steel |
| Ball material | GCr15SiMn |
| Temperature - T(min) [°C] | -30 |
| Temperature - T(max) [°C] | +110 |
| Single bearing - execution and preload | GB = Single, universally matchable, moderate preload |
| Ring type | inner rings(1 piece), outer rings(1 piece) |
| Load Direction | Angular Contact |
| Seal type | open |
| Grease quantity - Gref [cm3] | 15 |
| f0 Calculation coefficient | 9.7 |
| Dimension | |
| d φ Inside [inch] | 3.740 |
| D Φ Outside [inch] | 5.709 |
| B Width [inch] | 0.945 |
| r1,r2(min.) Chamfer [inch] | 0.059 |
| r3,r4(min.) Chamfer [inch] | 0.039 |
| ra(max.) Fillet [inch] | 0.059 |
| rb(max.) Fillet [inch] | 0.039 |
| d1 [inch] | 4.476 |
| d2 [inch] | 4.378 |
| D1 [inch] | 5.118 |
| D2 [inch] | 5.118 |
| Performance (Load Capacity and speeds) | |
| Cr Dynamic Radial [lbf] | 6610 |
| C0r Static Radial [lbf] | 5805 |
| Pu Fatigue Radial [lbf] | 206 |
| Attainable speeds (Grease) [r/min] | 11873 |
| Attainable speeds (Oil-air) [r/min] | 17949 |
| Abutment dimensions | |
| da(min.) [inch] | 4.016 |
| db(min.) [inch] | 4.016 |
| Da(max.) [inch] | 5.433 |
| Db(max.) [inch] | 5.528 |
| dn [inch] | 4.528 |
The 7019 CBGB/P4A Ultra-precision angular contact ball bearings are primarily composed of high-precision bearing steel inner and outer rings, steel balls, and a cage. The cage is available in ball-guided polyamide cages (silent series) or brass cages. Contact angles are available in various specifications, including 15°, 25°, and 40°, with precision grades reaching P4 and above.
Ultra-precision angular contact ball bearings offer a cost advantage while maintaining high rigidity and high speed. The silent series uses ball-guided polyamide cages, significantly reducing rotational noise and vibration. Optimized tolerance ranges result in more uniform load distribution in bearing groups, superior radial stiffness, and smooth and reliable operation.
Share this product to:
Let more people see your product
