7001CTRSUMP3 bearings ( 12 mm x 28 mm x 8 mm) have the advantages of High speed, ultra-precision, high rigidity, low operating friction, and long service life, and are therefore widely used in the Machine tool spindles, high-speed motors, ball screws, industrial robots and precision rotating equipment.

| Part Number | 7001CTRSUMP3 |
| Design type | 7 = Standard High-Accuracy |
| Bearing Type | High-Accuracy Angular Contact Ball Bearings, Standard Series |
| Accuracy class | P3 = dimensional tolerances (P4), running accuracy (P2) |
| Cage | TR = Phenolic resin, Outer ring guided |
| Equivalent | 7001C TR SUM P3 |
| Arrangement | SU = Single row (Universal) |
| Seal | Open type |
| Dimension series | 0 = 10 Series |
| Weight [kg] | 0.021 |
| Contact angle - α [°] | C = 15 |
| Dimension | |
| Inside - d φ [mm] | 12 |
| Outside - D Φ [mm] | 28 |
| Width - B [mm] | 8 |
| Chamfer - r min [mm] | 0.3 |
| Chamfer - r1 min [mm] | 0.15 |
| Effective Load Center - a [mm] | 6.7 |
| Abutment Dimensions | |
| da min [mm] | 14.5 |
| Da max [mm] | 25.5 |
| Db max [mm] | 26.8 |
| Fillet Radius - ra max [mm] | 0.3 |
| Fillet Radius - rb max [mm] | 0.15 |
| Performance | |
| Radial Dynamic - Cr [N] | 6064 |
| Radial Static - C0r [N] | 2888 |
| Speed ratings (grease) - nB [min–1] | 57279 |
| Speed ratings (oil) - nG [min–1] | 87089 |
| Permissible Axial Load [N] | 2374 |
| Factor - fo | 13.2 |
| Preload | |
| Preload | M = Medium Preload |
| M [N] | 57 |
| M [N/µm] | 26 |
| M [µm] | -6 |
| Other Arrangement | DU arrangement 2 set: DB(<>): 7001CTRDBMP3; DF(><): 7001CTRDFMP3; DT(<<): 7001CTRDTMP3 DUD arrangement 3 set: DBD(<<>): 7001CTRDBDMP3; DFD(>><): 7001CTRDFDMP3; DTD(<<<): 7001CTRDTDMP3 QU arrangement 4 set: DBB(<<>>): 7001CTRDBBMP3; DFF(>><<): 7001CTRDFFMP3; DTT(<<<<): 7001CTRDTTMP3; DBT(<<<>): 7001CTRDBTMP3; DFT(>>><): 7001CTRDFTMP3 |
The 7001CTRSUMP3 Ultra-precision angular contact ball bearings are primarily composed of high-precision bearing steel inner and outer rings, steel balls (ceramic balls or EQTF? ultra-long life steel balls optional), and a cage. Contact angles are available in various specifications including 15°, 18°, 25°, 30°, and 40°. Cages are available in polyamide resin (TYN), phenolic resin (TR), and copper alloy materials.
Ultra-precision angular contact ball bearings utilize Robust series technology, achieving low heat generation and ultra-high speeds through optimized internal dimensional design. Using the independently developed SHX heat-resistant steel material, rolling fatigue life is extended to four times that of SUJ2 material, and high-speed performance is improved by 20%. Employing oil-air lubrication SpinShot II technology, speeds up to 40,000 rpm in the NT#40 class, with noise reduction of 3-5 dB.















