694 Bearing 4x11x4mm
694
Bore Diameter:4 mm
Outside Diameter:11 mm
Width:4 mm
Weight:0.0018 kg
The 694 bearing is a deep groove ball bearing with an inner diameter of 4 mm , an outer diameter of 11 mm, a width of 4 mm. It typically uses P0,P5,P6,P4 grade precision tolerances and seal,open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:4mm
Outer diameter:11mm
Width:4mm
Weight :0.0018kg
Open type deep groove ball bearing is suitable for high speed and high speed running, and very durable, need not often maintenance. These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry. Mainly bear radial load, also can withstand a certain amount of axial load.
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6215bearing
- Deep groove ball bearing is the most commonly used rolling bearing. Its
-
- 6306-2RS bearing 30x72x19mm
- Bearing Type:Deep groove ball bearing Inner Diameter:30mm Outer diameter:72mm Width:19mm Weight :0.345kg
-
- 696 bearing 6x15x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:6mm Outer diameter:15mm Width:5mm Weight :0.0038kg
-
- 6412-2Z bearing 60x150x35mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:150mm Width:35mm Weight :2.811kg
-
- 6805-2RS bearing 20x32x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:37mm Width:7mm Weight :0.048kg
-
- 6304-2RS bearing 20x52x15mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:52mm Width:15mm Weight :0.143kg
-
- 32009 bearing 45x75x20.0mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32009 bearing Inner: 45mm Outside diameter: 75mm Thickness:20.0mm
-
- 6803 bearing 17x26x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:17mm Outer diameter:26mm Width:5mm Weight :0.008kg