6804 Bearing 20x32x7mm
6804
Bore Diameter:20 mm
Outside Diameter:32 mm
Width:7 mm
Weight:0.018 kg
The 6804 bearing is a deep groove ball bearing with an inner diameter of 20 mm , an outer diameter of 32 mm, a width of 7 mm. It typically uses P0,P5,P6,P4 grade precision tolerances and seal,open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:20mm
Outer diameter:32mm
Width:7mm
Weight :0.018kg
Open type deep groove ball bearing is suitable for high speed and high speed running, and very durable, need not often maintenance. These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry. Mainly bear radial load, also can withstand a certain amount of axial load.
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6305-2Z bearing 25x62x17mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:62mm Width:17mm Weight :0.22kg
-
- 693-2Z bearing 3x8x3mm
- Bearing Type:Deep groove ball bearing Inner Diameter:3mm Outer diameter:8mm Width:3mm Weight :0.0006kg
-
- 6305-2RS bearing 25x62x17mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:62mm Width:17mm Weight :0.229kg
-
- 6213-2Z bearing 65x120x23mm
- Bearing Type:Deep groove ball bearing Inner Diameter:65mm Outer diameter:120mm Width:23mm Weight :0.98kg
-
- 6405-2RS bearing 25x80x21mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:80mm Width:21mm Weight :0.54kg
-
- 32212 bearing 60x110x29.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32212 bearing Inner: 60mm Outside diameter: 110mm Thickness:
-
- 699-2Z bearing 9x20x6mm
- Bearing Type:Deep groove ball bearing Inner Diameter:9mm Outer diameter:20mm Width:6mm Weight :0.0082kg
-
- 30211 bearing 55x100x22.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30211 bearing Inner: 55mm Outside diameter: 100mm Thickness: 22.75mm