6411 Bearing 55x140x33mm

🔍

6411

Bore Diameter:55 mm

Outside Diameter:140 mm

Width:33 mm

Weight:2.316 kg

The 6411 bearing is a deep groove ball bearing with an inner diameter of 55 mm , an outer diameter of 140 mm, a width of 33 mm. It typically uses P0, P6, P5,P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.

Dimensions:

Inside Diameter:

55 mm

Outside Diameter:

140 mm

Thickness:

33 mm

Weight:

2.316 KG

Specifications:

Structure:

deep groove

Brand:

CNJX

Precision Rating:

P0, P6, P5,P4

Bearing Material:

Chrome Steel

Seals Type:

Seal, Open

Transaction Information:

Payment term:

T/T

Delivery time:

within 25 days

Detailed description

Bearing Type:Deep groove ball bearing

Inner Diameter:55mm

Outer diameter:140mm

Width:33mm

Weight :2.316kg

Open type deep groove ball bearing is suitable for high speed and high speed running, and very durable, need not often maintenance. These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry. Mainly bear radial load, also can withstand a certain amount of axial load.

Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.

Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.

Range of Sizes

Inside diameter size range: 10 mm to 1320 mm

Outside diameter size range: 30 mm ~ 1600 mm

Scope: the width 9 mm to 300 mm

Cage:

Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.

Notice :

Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time

Operating Principle:

Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.

Share this product to:

Let more people see your product

How can you buy 6411 Bearing 55x140x33mm on the Internet?
High quality 6411 ( 2.316 kg Mass, ID: 55 mm OD: 140 mm WD: 33 mm , P0, P6, P5,P4 Accuracy Class , Chrome Steel Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. 6411. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.

- 6304-2Z bearing 20x52x15mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:52mm Width:15mm Weight :0.14kg
- 6403-2RS bearing 17x62x17mm
- Bearing Type:Deep groove ball bearing Inner Diameter:17mm Outer diameter:62mm Width:17mm Weight :0.27kg
- 6902-2Z bearing 15x28x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:15mm Outer diameter:28mm Width:7mm Weight :0.016kg
- 696-2RS bearing 6x15x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:6mm Outer diameter:15mm Width:5mm Weight :0.0038kg
- 699-2RS bearing 9x20x6mm
- Bearing Type:Deep groove ball bearing Inner Diameter:9mm Outer diameter:20mm Width:6mm Weight :0.0082kg
- 6907-2Z bearing 35x55x10mm
- Bearing Type:Deep groove ball bearing Inner Diameter:35mm Outer diameter:55mm Width:10mm Weight :0.074kg
- 6909 bearing 45x68x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:45mm Outer diameter:68mm Width:12mm Weight :0.128kg
- 6805 bearing 20x32x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:37mm Width:7mm Weight :0.048kg

6411 Bearing 55x140x33mm

6411 Related Products »

Product Groups

Information

Category