6309 Deep Groove Ball Bearing

This types of 6309 bearings are the most representative and widely used bearing.It can accommodate axial loads in both directions, in addition to radial loads, even at high speeds.Theay are available for low noise and low vibration.Bearings with mental shields and rubber seals are pre-lubrecated by some grease.Bearing with snap ring and flange on the outer ring.Deep groove ball bearings with filling slots have the same dimensions with standard ones. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots.

 #8226;Suitable for very high rotating speeds

#8226;Well suited for medium high radial and axial loads in one or both directions
#8226;Various seals and grease variants available for different operating conditions
#8226;Numerous clearance and tolerance classes available for different operating conditions
#8226;Series: 600, 6000, 6200, 6300, 6400, 1600; Thin-ring: 61800, 61900
#8226;Application examples: electrical motors, general machinery, industrial gearboxes, pumps, agricultural machinery, etc.
 We now can offer the bearings with open , one shield ,two shields, one seal, two seals ,NR type.

There are now two types according to the row of the balls and the details are as follows:

6309 Single Row Deep Groove Ball Bearings

are the most common type of rolling bearings. The use is very widespread.The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of the balls. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highly suitable for applications where high speeds and low power loss are required. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are most commonly used.

Share this product to:     Let more people see your product