6308 Bearing 40x90x23mm
6308
Bore Diameter:40 mm
Outside Diameter:90 mm
Width:23 mm
Weight:0.639 kg
The 6308 bearing is a deep groove ball bearing with an inner diameter of 40 mm , an outer diameter of 90 mm, a width of 23 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:40mm
Outer diameter:90mm
Width:23mm
Weight :0.639kg
Open type deep groove ball bearing is suitable for high speed and high speed running, and very durable, need not often maintenance. These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry. Mainly bear radial load, also can withstand a certain amount of axial load.
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 6305-2RS bearing 25x62x17mm
- Bearing Type:Deep groove ball bearing Inner Diameter:25mm Outer diameter:62mm Width:17mm Weight :0.229kg
-
- 6803-2Z bearing 17x26x5mm
- Bearing Type:Deep groove ball bearing Inner Diameter:17mm Outer diameter:26mm Width:5mm Weight :0.007kg
-
- 6311-2RS bearing 55x120x29mm
- Bearing Type:Deep groove ball bearing Inner Diameter:55mm Outer diameter:120mm Width:29mm Weight :1.37kg
-
- 6910-2RS bearing 50x72x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:72mm Width:12mm Weight :0.132kg
-
- 32208 bearing 40x80x24.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32208 bearing Inner: 40mm Outside diameter: 80mm Thickness:24.75mm
-
- 6212-2Z bearing 60x110x22mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:110mm Width:22mm Weight :0.77kg
-
- 30319 bearing 95x200x50mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30319 bearing Inner: 95mm Outside diameter: 200mm Thickness:
-
- 6910-2RS bearing 50x72x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:72mm Width:12mm Weight :0.132kg