625 2RS Miniature Ball Bearings 5x16x5mm
The 625 2RS bearing is a Deep groove ball bearings with an inner diameter of 5 mm , an outer diameter of 16 mm, a width of 5 mm. It typically uses ABEC-1, ABEC-3, ABEC-5 grade precision tolerances and features a steel cage, supreme bearing steel AISI 52100 balls, It primarily bears radial, Its dynamic radial rated load is approximately 1760N, its static radial rated load is approximately 680N. It uses C0,C2,C3 standard radial clearance, 2RS type, rubber. together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Application: automobiles, machine tools, motors, instruments, construction machines, railway vehicles, agricultural machines and various other special machines.
625 2RS deep groove ball bearing is made of supreme bearing steel AISI 52100. The bearing is covered with two rubber seals on both sides. The radial clearance could be C0, C2, C3. The tolerance grade could be ABEC-1, ABEC-3, ABEC-5. The hardness is HRC58-62.
Besides, TIK Industrial Co., limited could also supply the following items:
| Bearing No. | Boundary dimensions | Basic load ratings (kN) | Limiting speed | Mass | |||||
| mm | Dynamic | Static | rpm | g | |||||
| d | D | B | rs min | Cr | Cor | Grease | Oil | ≈ | |
| 60/1.5 | 1.5 | 6 | 2.5 | 0.15 | 274 | 86 | 71,000 | 84,000 | 0.350 |
| 602 | 2 | 7 | 2.8 | 0.15 | 380 | 125 | 62,000 | 73,000 | 0.540 |
| 60/2.5 | 2.5 | 8 | 2.8 | 0.15 | 550 | 174 | 56,000 | 66,000 | 0.720 |
| 603 | 3 | 9 | 3 | 0.15 | 635 | 219 | 50,000 | 59,000 | 0.920 |
| 604 | 4 | 12 | 4 | 0.2 | 970 | 360 | 43,000 | 51,000 | 2.100 |
| 605 | 5 | 14 | 5 | 0.2 | 1,330 | 505 | 39,000 | 46,000 | 3.500 |
| 606 | 6 | 17 | 6 | 0.3 | 2,190 | 865 | 35,000 | 42,000 | 6.000 |
| 607 | 7 | 19 | 6 | 0.3 | 2,240 | 910 | 34,000 | 40,000 | 8.000 |
| 608 | 8 | 22 | 7 | 0.3 | 3,350 | 1,400 | 32,000 | 37,000 | 12.000 |
| 609 | 9 | 24 | 7 | 0.3 | 3,400 | 1,450 | 31,000 | 36,000 | 14.000 |
| 623 | 3 | 10 | 4 | 0.15 | 640 | 224 | 50,000 | 58,000 | 1.600 |
| 624 | 4 | 13 | 5 | 0.2 | 1,310 | 490 | 42,000 | 49,000 | 3.200 |
| 625 | 5 | 16 | 5 | 0.3 | 1,760 | 680 | 37,000 | 44,000 | 4.800 |
| 626 | 6 | 19 | 6 | 0.3 | 2,340 | 885 | 34,000 | 40,000 | 8.100 |
| 627 | 7 | 22 | 7 | 0.3 | 3,350 | 1,400 | 32,000 | 37,000 | 13.000 |
| 628 | 8 | 24 | 8 | 0.3 | 4,000 | 1,590 | 31,000 | 36,000 | 17.000 |
| 629 | 9 | 26 | 8 | 0.6 | 4,550 | 1,960 | 30,000 | 35,000 | 20.000 |
| 67/2.5 | 2.5 | 5 | 1.5 | 0.08 | 153 | 59 | 70,000 | 82,000 | 0.110 |
| 673 | 3 | 6 | 2 | 0.08 | 242 | 94 | 60,000 | 71,000 | 0.200 |
| 674 | 4 | 7 | 2 | 0.08 | 222 | 88 | 54,000 | 63,000 | 0.280 |
| 675 | 5 | 8 | 2 | 0.08 | 217 | 91 | 49,000 | 57,000 | 0.320 |
| 676 | 6 | 10 | 2.5 | 0.1 | 465 | 196 | 43,000 | 51,000 | 0.650 |
| 677 | 7 | 11 | 2.5 | 0.1 | 555 | 269 | 40,000 | 47,000 | 0.670 |
| 678 | 8 | 12 | 2.5 | 0.1 | 515 | 252 | 38,000 | 45,000 | 0.750 |
| 679 | 9 | 14 | 3 | 0.1 | 920 | 465 | 36,000 | 42,000 | 1.400 |
| 681 | 1 | 3 | 1 | 0.05 | 80 | 22 | 120,000 | 140,000 | 0.050 |
| 68/1.5 | 1.5 | 4 | 1.2 | 0.15 | 102 | 29 | 88,000 | 100,000 | 0.070 |
| 682 | 2 | 5 | 1.5 | 0.08 | 171 | 51 | 74,000 | 87,000 | 0.130 |
| 68/2.5 | 2.5 | 6 | 1.8 | 0.08 | 209 | 73 | 65,000 | 76,000 | 0.220 |
| 683 | 3 | 7 | 2 | 0.1 | 390 | 130 | 58,000 | 68,000 | 0.330 |
| 684 | 4 | 9 | 2.5 | 0.15 | 640 | 224 | 49,000 | 57,000 | 0.670 |
| 685 | 5 | 11 | 3 | 0.15 | 715 | 282 | 43,000 | 51,000 | 1.100 |
| 686 | 6 | 13 | 3.5 | 0.15 | 1,080 | 440 | 39,000 | 46,000 | 1.900 |
| 687 | 7 | 14 | 3.5 | 0.15 | 1,170 | 505 | 37,000 | 44,000 | 2.100 |
| 688 | 8 | 16 | 4 | 0.2 | 1,610 | 715 | 35,000 | 41,000 | 3.100 |
| 689 | 9 | 17 | 4 | 0.2 | 1,720 | 820 | 33,000 | 39,000 | 3.200 |
| 691 | 1 | 4 | 1.6 | 0.1 | 157 | 43 | 96,000 | 110,000 | 0.110 |
| 69/1.5 | 1.5 | 5 | 2 | 0.15 | 171 | 51 | 79,000 | 93,000 | 0.180 |
| 692 | 2 | 6 | 2.3 | 0.15 | 279 | 89 | 67,000 | 79,000 | 0.310 |
| 69/2.5 | 2.5 | 7 | 2.5 | 0.15 | 284 | 96 | 59,000 | 70,000 | 0.430 |
| 693 | 3 | 8 | 3 | 0.15 | 560 | 180 | 54,000 | 63,000 | 0.610 |
| 694 | 4 | 11 | 4 | 0.15 | 715 | 276 | 45,000 | 52,000 | 1.800 |
| 695 | 5 | 13 | 4 | 0.2 | 1,080 | 430 | 40,000 | 47,000 | 2.400 |
| 696 | 6 | 15 | 5 | 0.2 | 1,350 | 530 | 37,000 | 44,000 | 3.800 |
| 697 | 7 | 17 | 5 | 0.3 | 1,610 | 715 | 35,000 | 41,000 | 5.200 |
| 698 | 8 | 19 | 6 | 0.3 | 1,990 | 865 | 33,000 | 39,000 | 7.300 |
| 699 | 9 | 20 | 6 | 0.3 | 2,480 | 1,090 | 32,000 | 38,000 | 8.200 |
Share this product to:
Let more people see your product
-
- Miniature ball bearings 608ZZ, 608 2RS
- 608ZZ, 608 2RS bearings are made of supreme bearing steel AISI 52100.
-
- RLS5 2RS inch deep groove ball bearings 15.875x39.688x11.112mm
- RLS5 2RS is made of supreme chrome steel AISI52100. The bearing is
-
- R10ZZ inch deep groove ball bearings 15.875x34.925x7.14mm
- R10ZZ inch deep groove ball bearing is made of supreme chrome
-
- R8ZZ inch deep groove ball bearings 12.7x28.575x6.35mm
- R8ZZ inch deep groove ball bearing is made of supreme chrome steel
-
- Miniature ball bearings 608ZZ, 608 2RS
- 608ZZ, 608 2RS bearings are made of supreme bearing steel AISI 52100.
-
- Needle roller bearings NB110 for cars
- Needle roller bearings NB110 are mainly applicable to various cars.
-
- HF0812 one way clutch needle roller bearings 8x12x12mm
- HF0812 one way clutch needle roller bearings are made of GCr15 bearing
-
- PWKR35 2RS cam follower track roller bearings 16x35x52mm
- PWKR35 2RS cam follower stud type track roller bearings are made of