6207 Bearing 35x72x17mm
6207
Bore Diameter:35 mm
Outside Diameter:72 mm
Width:17 mm
Weight:0.288 kg
The 6207 bearing is a deep groove ball bearing with an inner diameter of 35 mm , an outer diameter of 72 mm, a width of 17 mm. It typically uses PO、P6、P5、P4 grade precision tolerances and Seal, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Bearing Type:Deep groove ball bearing
Inner Diameter:35mm
Outer diameter:72mm
Width:17mm
Weight :0.288kg
Open type deep groove ball bearing is suitable for high speed and high speed running, and very durable, need not often maintenance. These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry. Mainly bear radial load, also can withstand a certain amount of axial load.
Deep groove ball bearings mounted on a shaft, within the scope of the axial clearance of bearing, can limit shaft or the shell axial displacement in two directions, so can in two-way axial positioning. In addition, this class also has a certain bearing capacity, when compared with the shell hole '2 ~ 10', can still work normally, but had certain influence on bearing life.
Deep groove ball bearing cage for stamping steel ribbon cage, and also can use engineering plastics, copper solid cage. Large bearing use car more metal solid cage. The use of sealed bearing internal according to different environment can be added the corresponding special bearing grease.
Range of Sizes
Inside diameter size range: 10 mm to 1320 mm
Outside diameter size range: 30 mm ~ 1600 mm
Scope: the width 9 mm to 300 mm
Cage:
Deep groove ball bearings generally USES the steel plate stamping entities cage or brass cage. When diameter less than 400 mm, USES the steel plate stamping cage without post code, when the diameter is larger than 400 mm multi-purpose rear brass cage without entity code.
Notice :
Deep groove ball bearings, bearing load during operation is too small, can produce sliding between the ball and raceway, be the cause of the scratch. Especially the big ball and cage weight large deep groove ball bearings have this tendency. In use is expected to have the load is too small, when selecting a bearing should contact related people in time
Operating Principle:
Deep groove ball bearings mainly take radial load, also can bear radial load and axial load at the same time. When its only bear radial load, the contact Angle is zero. When deep groove ball bearings with larger radial clearance, with the performance of angular contact bearings, can withstand large axial load, deep groove ball bearing friction coefficient is small, the limit rotational speed is high.
Share this product to:
Let more people see your product
-
- 629 bearing
- Deep groove ball bearing is the most commonly used rolling bearing. Its
-
- 6306 bearing 30x72x19mm
- Bearing Type:Deep groove ball bearing Inner Diameter:30mm Outer diameter:72mm Width:19mm Weight :0.346kg
-
- 6910-2RS bearing 50x72x12mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:72mm Width:12mm Weight :0.132kg
-
- 6310 bearing 50x110x27mm
- Bearing Type:Deep groove ball bearing Inner Diameter:50mm Outer diameter:110mm Width:27mm Weight :1.082kg
-
- 6906-2RS bearing 30x47x9mm
- Bearing Type:Deep groove ball bearing Inner Diameter:30mm Outer diameter:47mm Width:9mm Weight :0.048kg
-
- 30228 bearing 140x250x46.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30228 bearing Inner: 140mm Outside diameter: 250mm Thickness: 46.5mm
-
- 32309 bearing 45x100x38.25mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32309 bearing Inner: 45mm Outside diameter: 100mm Thickness: 38.25mm
-
- 6804-2Z bearing 20x32x7mm
- Bearing Type:Deep groove ball bearing Inner Diameter:20mm Outer diameter:32mm Width:7mm Weight :0.015kg